Importowanie plików STL lub OBJ
Tutorial |
Topic |
---|
Importowanie plików STL lub OBJ |
Level |
Beginner |
Time to complete |
30 minutes |
Authors |
r-frank, tłumaczenie: tomaszkowalczyk94 |
FreeCAD version |
0.16.6703 |
Example files |
See also |
None |
Wprowadzenie
W tym tutorialu omówimy jak importować pliki STL/OBJ do FreeCAD-a. Ponieważ formaty STL/OBJ są opisane przez siatkę wielokątów i nie posiadają przypisanych konkretnych jednostek wielkości, FreeCAD przyjmuje że wszystkie wartości podane w pliku są podane w mm. Jeśli jest inaczej, trzeba zeskalować model w aplikacji w której został stworzony (przed jego wyeksportowaniem) lub zeskalować model w FreeCAD po jego zaimportowaniu i konwersji do bryły.
Przykładowy plik
Dla tego przykładu możesz użyć swojego pliku STL lub stworzyć plik demo w ten sposób:
- Otwórz FreeCAD
- Stwórz nowy dokument
- Zmień warsztat na mesh workbench
- Dodaj torus przez Meshes → File:Mesh RegularSolid.png Regular solid... wyberają opcje:
- Radius1: 10 mm
- Radius2: 2 mm
- Sampling: 50
- kliknij Create and then on Close
- Zapisz plik za pomocą File → Save
Aby zaimportować plik STL lub OBJ, stwórz nowy dokument DreeCAD i wybierz File → Import z górnego menu.
Czyszczenie i naprawianie pliku STL/OBJ w celu przygotowania go do importu
FreeCAD może zaimportować każdy plik STL/OBJ.
Ale naszym celem jest storzenie bryły która może być potem modyfikowana (dodając pads/pockets).
Aby konwersja z siatki wielokątów do bryły się powiodła, musimy mieć pewność że siatka(mesh) jest "wodoszczelna" (nie zawiera dziur) lub nie ma żadnych innych błędów.
Warto pamiętać że FreeCAD nie jest dobrym edytorem siatki wielokątów, jest on zaprojektowany do pracy z bryłami.
FreeCAD ma pewne funkcje do operacji na siatce 3d w warsztacie mesh i OpenSCAD (niektóre operacje wymagają zainstalowanego i skonfigurowanego OpenSCAD)
Niektórzy użytkownicy lubią używać innych zewnętrznych narzędzi do naprawienia siatki wielokątów np:
- Netfabb Basic (Windows/Linux/Mac) - darmowy do użytku domowego (dostępne automatyczne naprawianie siatki)
- Meshlab (Windows/Linux/Mac) - Open Source
W tym tutorialu użyjemy warsztatu mesh dostępnego standardowo w FreeCAD do czyszczenia/naprawiania/weryfikowania naszego przykładowego pliku.
Automatyczne testowanie i naprawianie
- Otwórz FreeCAD i przykładowy plik zawierający obiekt siatki(mesh)
- Zmień warsztat na mesh
- Upewnij się że Twój obiekt mesh został wybrany w widoku drzewa po lewej.
- Wybierz Meshes → Analyze → Evaluate & Repair mesh... z górnego menu
- Upewnij się, że w rozwijanym menu w prawym górnym rogu wyświetla się nazwa twojego obiektu mesh.
- Kliknij na Analyze przy "All above tests together" (na dole)
- Teksty obok pola wyboru z nazwą obiektu mesh zmienią się, aby odzwierciedlić wyniki różnych testów.
- Jeśli zostaną wykryte błędy, odpowiednie pola wyboru zostaną zaznaczone i będziesz mógł wybrać Repair
- Kliknij Close aby zamknąć menu.
Porządkuj wektory normalne
Porządkowanie wektorów normalnych (harmonizing normals) siatki obiektu może być robione przez:
Tip: By choosing the mesh object in the tree view, going to the view tab in the property view and changing "Lighting" from "Two Side" to "One Side" you can identify triangles with flipped normals. If the normals point into the mesh the triangle will be shown in black.
Closing holes
You can also manually close holes in your mesh object by
- Selecting your mesh object in the tree view
- Choose Meshes → Fill holes... from the top menu
- Specify maximum number of edges to be filled (3 is default)
- Since STL and OBJ are meshes consisting of triangles the default number of edges should be sufficient
Another method of manually closing holes in your mesh object would be
- Selecting your mesh object in the tree view
- Choose Meshes → Close hole from the top menu
- Select one of the edges of the hole in the mesh object in the 3D view
- Right-Click in 3D view and choose Leave hole-filling mode to exit the command
Conversion mesh to solid
- Switch to part workbench
- Make sure your mesh object is selected in the tree view, otherwise select it
- Choose Part → Create shape from mesh ... from top menu
- Specify tolerance for sewing shape (0,1 is default)
- A new object will be created in the tree view (with blue shape icon, instead of green mesh icon)
- Select the newly created object in the tree view
- Choose Part → Refine shape from the top menu
- A new object will be created in the tree view and the previous one will be made invisible
- Select the newly created object in the tree view
- Choose Part → Convert to solid from the top menu
- A new object will be created in the tree view, bearing "(Solid)" in its name, to indicate it is a solid
Since the created solid has no history and no editable features (like a simple copy in FreeCAD)
you could delete all previous objects from the tree view.
This would keep your file size small ...
Links