Difference between revisions of "Image Module/zh"

From FreeCAD Documentation
Jump to navigation Jump to search
(Updating to match new version of source page)
(Updating to match new version of source page)
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
<languages/>
 
<languages/>
{{docnav|[[FEM Workbench|FEM Workbench]]|[[Inspection Workbench|Inspection Workbench]]|IconL=Workbench_FEM.svg|IconR=InspectionWorkbench.svg}}
+
{{Docnav
 +
|[[FEM_Workbench|FEM Workbench]]
 +
|[[Inspection_Workbench|Inspection Workbench]]
 +
|IconL=Workbench_FEM.svg
 +
|IconR=Workbench_Inspection.svg
 +
}}
  
[[Image:Workbench_Image.svg|64px]]
+
[[Image:Workbench_Image.svg|thumb|128px|Image workbench icon]]
  
 
== Introduction ==
 
== Introduction ==
 +
{{TOCright}}
  
{{TOCright}}
+
The [[Image:Workbench_Image.svg|24px]] [[Image_Workbench|Image Workbench]] manages different types of [[bitmap|bitmap]] images, and allows you to open them in FreeCAD.
The [[Image Workbench]] manages different types of [[bitmap]] images, and allows you to open them in FreeCAD.
 
  
 
Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.
 
Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.
Line 13: Line 18:
 
== Tools ==
 
== Tools ==
  
* [[Image:Image-import.svg|32px]] [[Image_Open|Open]]: open an image on a new viewport.
+
* [[Image:Image_Open.svg|32px]] [[Image_Open|Open]]: open an image on a new viewport.
 
* [[Image:Image-import-to-plane.svg|32px]] [[Image_CreateImagePlane|Import to plane]]: import an image to a plane in the 3D view.
 
* [[Image:Image-import-to-plane.svg|32px]] [[Image_CreateImagePlane|Import to plane]]: import an image to a plane in the 3D view.
 
* [[Image:Image-scale.svg|32px]] [[Image_Scaling|Scaling]]: scale an image imported to a plane.
 
* [[Image:Image-scale.svg|32px]] [[Image_Scaling|Scaling]]: scale an image imported to a plane.
Line 19: Line 24:
 
== Features ==
 
== Features ==
  
* Like a [[Sketcher Workbench|Sketch]], an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
+
* Like a [[Sketcher_Workbench|Sketch]], an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
 
* The image is imported with relation of 1 pixel to 1 millimeter.
 
* The image is imported with relation of 1 pixel to 1 millimeter.
 
* The recommendation is to have the imported image at a reasonable resolution.
 
* The recommendation is to have the imported image at a reasonable resolution.
  
 
== Workflow ==
 
== Workflow ==
A major use of this workbench is tracing over the image, with the [[Draft Workbench|Draft]] or [[Sketcher Workbench|Sketcher]] tools, in order to generate a solid body based on the contours of the image.
+
A major use of this workbench is tracing over the image, with the [[Draft_Workbench|Draft]] or [[Sketcher_Workbench|Sketcher]] tools, in order to generate a solid body based on the contours of the image.
  
 
Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.
 
Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.
Line 30: Line 35:
 
The offset of the image can be set during import, or changed later through its properties.
 
The offset of the image can be set during import, or changed later through its properties.
  
{{docnav|[[FEM Workbench|FEM Workbench]]|[[Inspection Workbench|Inspection Workbench]]|IconL=Workbench_FEM.svg|IconR=InspectionWorkbench.svg}}
+
{{Docnav
 +
|[[FEM_Workbench|FEM Workbench]]
 +
|[[Inspection_Workbench|Inspection Workbench]]
 +
|IconL=Workbench_FEM.svg
 +
|IconR=Workbench_Inspection.svg
 +
}}
  
{{Image Tools navi}}
 
  
{{Userdocnavi}}
+
{{clear}}
  
[[Category:Workbenches]]
+
{{Image Tools navi{{#translation:}}}}
  
 +
{{Userdocnavi{{#translation:}}}}
  
{{clear}}
+
[[Category:Workbenches{{#translation:}}]]

Latest revision as of 16:12, 12 December 2020

Other languages:
Bahasa Indonesia • ‎Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский • ‎українська • ‎中文 • ‎中文(中国大陆)‎ • ‎中文(台灣)‎ • ‎日本語
Image workbench icon

Introduction

The Workbench Image.svg Image Workbench manages different types of bitmap images, and allows you to open them in FreeCAD.

Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.

Tools

  • Image Open.svg Open: open an image on a new viewport.
  • Image-import-to-plane.svg Import to plane: import an image to a plane in the 3D view.
  • Image-scale.svg Scaling: scale an image imported to a plane.

Features

  • Like a Sketch, an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
  • The image is imported with relation of 1 pixel to 1 millimeter.
  • The recommendation is to have the imported image at a reasonable resolution.

Workflow

A major use of this workbench is tracing over the image, with the Draft or Sketcher tools, in order to generate a solid body based on the contours of the image.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.