Верстак Image

From FreeCAD Documentation
Revision as of 03:13, 14 April 2015 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Модуль изображений управляет различными типами растровых изображений, и позволяет открывать их в FreeCAD. В настоящее время модуль позволяет открывать файлы формата .bmp, .jpg, .png and .xpm в отдельном окне просмотра. Существует также инструмент позволяющий захватывать изображение с веб-камеры.

The image workbenches also allow to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. .
This function is only available if you have opened a FreeCAD document.

The image can be moved in 3D-space by editing the placement in the Property editor. The major use is tracing over the image, in order to generate a new part at using the image as template.

The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.

Tip:
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.
You can set an offset of -0,1 at import or later by editing the placement of the image.

Draft Module/ru
Macros/ru