Image Module/pl

From FreeCAD Documentation
Revision as of 03:13, 14 April 2015 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to navigation Jump to search

Moduł obrazu obsługuje różne rodzaje bitmap i pozwala otwierać je we FreeCADzie. Aktualnie moduł pozwala na otwieranie formatów plików .bmp, .jpg, .png i .xpm w oddzielnym oknie przeglądarki. Obecne jest także narzędzie pozwalające na przechwytywanie obrazu z kamerki internetowej.

The image workbenches also allow to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. Image-import.svg.
This function is only available if you have opened a FreeCAD document.

The image can be moved in 3D-space by editing the placement in the Property editor. The major use is tracing over the image, in order to generate a new part at using the image as template.

The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.

Tip:
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.
You can set an offset of -0,1 at import or later by editing the placement of the image.

Other languages:
Bahasa Indonesia • ‎Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский • ‎українська • ‎中文 • ‎中文(中国大陆)‎ • ‎中文(台灣)‎ • ‎日本語