Image Module/画像モジュール

From FreeCAD Documentation
Revision as of 10:42, 5 December 2018 by Luc (talk | contribs) (Created page with "画像モジュールは様々なタイプのビットマップ画像を扱うためのもので、FreeCADでそれらの画像を開くことを可能にします。現在の...")
Jump to navigation Jump to search
Other languages:
Bahasa Indonesia • ‎Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский • ‎українська • ‎中文 • ‎中文(中国大陆)‎ • ‎中文(台灣)‎ • ‎日本語

The image module manages different types of bitmap images, and lets you open them in FreeCAD.



  • The image workbench also allows you to import an image on a plane in the 3D-space of FreeCAD with Image Import, the second button of the image workbench.
  • The imported image can be attached like a sketch to one of the main three planes (XY/XZ/YZ) with positive or negative offset.
  • This function is only available if you have opened a FreeCAD document.
  • The image can be moved in 3D-space by editing the placement in the Property editor.
  • The major use is tracing over the image, in order to generate a new part while using the image as a template.
  • The image is imported with 1 pixel = 1mm.
 * The recommendation is to have the imported image at a reasonable resolution.
  • The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.
  • The image can be moved by editing the X/Y/Z-values in the Property editor.
  • The image can be rotated around any axis by using the Property editor.

Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.
You can set an offset of -0,1 mm at import or later by editing the placement of the image.


Image Import.png Image Import