Ambiente Image

From FreeCAD Documentation
Revision as of 14:36, 10 October 2018 by Renatorivo (talk | contribs) (Created page with "== Funzioni ==")

Il modulo Immagine gestisce diversi tipi di immagini bitmap, e permette di aprirle in FreeCAD.

Attualmente, il modulo consente di aprire file di formato .bmp, .jpg, .png e .xpm in una finestra di visualizzazione separata.

Funzioni

  • The image workbench also allows you to import an image on a plane in the 3D-space of FreeCAD with Image Import, the second button of the image workbench.
  • The imported image can be attached like a sketch to one of the main three planes (XY/XZ/YZ) with positive or negative offset.
  • This function is only available if you have opened a FreeCAD document.
  • The image can be moved in 3D-space by editing the placement in the Property editor.
  • The major use is tracing over the image, in order to generate a new part while using the image as a template.
  • The image is imported with 1 pixel = 1mm.
 * The recommendation is to have the imported image at a reasonable resolution.
  • The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.
  • The image can be moved by editing the X/Y/Z-values in the Property editor.
  • The image can be rotated around any axis by using the Property editor.

Suggerimento:
La tracciatura di elementi di sketch su un'immagine funziona meglio se l'immagine ha un piccolo offset negativo rispetto al piano dello schizzo, ovvero se l'immagine è posizionata leggermente dietro al piano dello schizzo .
È possibile impostare un offset di -0,1 mm in fase di importazione oppure successivamente, modificando la posizione dell'immagine.

Strumenti

Importa immagine