Ambiente de trabajo Imagen

From FreeCAD Documentation
Revision as of 19:09, 26 April 2018 by Bitacovir (talk | contribs) (Created page with "El Ambiente de trabajo de imágenes también le permiten importar una imagen en un plano en el espacio 3D de FreeCAD. Esta función está disponible a través del segundo bot...")

El módulo de imagen maneja diferentes tipos de imágenes de mapa de bits, y le permite abrirlos en FreeCAD.

Actualmente, los módulos le permiten abrir los formatos de archivo .bmp, .jpg, .png y .xpm en una ventana de visualización separada.

El Ambiente de trabajo de imágenes también le permiten importar una imagen en un plano en el espacio 3D de FreeCAD. Esta función está disponible a través del segundo botón del Ambiente de trabajo de la imagen. .
La imagen importada se puede adjuntar como un boceto a uno de los tres planos principales (XY / XZ / YZ) con desplazamiento positivo o negativo.
Esta función solo está disponible si ha abierto un documento de FreeCAD.

The image can be moved in 3D-space by editing the placement in the Property editor.
The major use is tracing over the image, in order to generate a new part at using the image as template.

The image is imported with 1 pixel = 1mm. Therefore it is recommended to have the imported image in a reasonable resolution. The image can be scaled by editing the "XSize" and "YSize" values in the Property editor. The image can be also moved by editing the X/Y/Z-values in the Placement-Tab. The image can also be rotated around any axis by using the placement-dialogue.

Tip:
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.
You can set an offset of -0,1 mm at import or later by editing the placement of the image.

Tools

Image Import

Raytracing Module/es
Draft Module/es