Image CreateImagePlane/it: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "Se inizialmente non viene assegnato alcuno scostamento all'immagine, la sua posizione può ancora essere regolata nelle proprietà.")
Line 24: Line 24:
When importing the image, you may wish to add an offset of {{incode|-0.1 mm}} in order to place the image slightly behind the working plane; this will make it easy to trace (draw on top) the image with the [[Draft Module|Draft]] or [[Sketcher Workbench|Sketcher]] tools.
When importing the image, you may wish to add an offset of {{incode|-0.1 mm}} in order to place the image slightly behind the working plane; this will make it easy to trace (draw on top) the image with the [[Draft Module|Draft]] or [[Sketcher Workbench|Sketcher]] tools.


If no offset is given to the image initially, its position can still be adjusted in the [[property editor]].
Se inizialmente non viene assegnato alcuno scostamento all'immagine, la sua posizione può ancora essere regolata nelle [[property editor/it|proprietà]].


==Properties==
==Properties==

Revision as of 22:16, 16 December 2018

Immagine planare

Posizione nel menu
None
Ambiente
Image
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Apri immagine, Scala immagine

Descrizione

Lo strumento Immagine planare importa una immagine bitmap e la posiziona su uno dei piani XY, YZ o XZ.

Utilizzo

  1. Premere il pulsante Immagine planare.
  2. Selezionare l'immagine desiderata.
  3. Scegliere il piano in cui posizionare l'immagine, assegnare un valore di offset e premiere OK.

L'oggetto ImagePlane risultante utilizza il rapporto 1 pixel = 1 millimetro; affinché l'immagine sia visualizzata correttamente, deve avere una risoluzione sufficiente.

When importing the image, you may wish to add an offset of -0.1 mm in order to place the image slightly behind the working plane; this will make it easy to trace (draw on top) the image with the Draft or Sketcher tools.

Se inizialmente non viene assegnato alcuno scostamento all'immagine, la sua posizione può ancora essere regolata nelle proprietà.

Properties

Base

  • DatiPosition: specifies the coordinates of the base point of the image plane.
  • DatiAngle: specifies the angle of rotation of the image plane.
  • DatiAxis: specifies the axis used for the rotation angle.

Image Plane

  • DatiXSize: specifies the width of the image plane.
  • DatiYSize: specifies the height of the image plane.
  • DatiImage Plane: specifies the image to use for this plane.