FreeCAD and Mesh Import: Difference between revisions
Renatorivo (talk | contribs) No edit summary |
m (fix typo in section name) |
||
Line 26: | Line 26: | ||
Well, your shell seems to have errors, maybe it is not closed (has holes). Since the capabilities of the mesh workbench in FreeCAD are a little limited at the moment, you might want to try examining and repairing of your model with third-party software. After doing that, you may try importing and converting of your model again. |
Well, your shell seems to have errors, maybe it is not closed (has holes). Since the capabilities of the mesh workbench in FreeCAD are a little limited at the moment, you might want to try examining and repairing of your model with third-party software. After doing that, you may try importing and converting of your model again. |
||
== Third |
== Third Party Programs == <!--T:3--> |
||
* [http://meshlab.sourceforge.net/ Meshlab] |
* [http://meshlab.sourceforge.net/ Meshlab] |
||
** License: Open Source (GPL V2) |
** License: Open Source (GPL V2) |
Revision as of 14:49, 5 August 2021
Post-Import
After import the model is (for FreeCAD), just an assembly of faces. You might want to convert the model into a shape FreeCAD can recognize and that could be altered in FreeCAD.
To do this:
- Switch to the Part workbench
- Select the mesh, and go to the Part → Create shape from mesh or press the Part ShapeFromMesh button
- Click OK in the dialog
- Select the newly created shape
- Go to Part → Convert to solid
- Select the newly created solid
- Go to Part → Refine shape or press the Part RefineShape button
Note: The last step is not necessary, but it will clean the solid of most of its residual edges on planar and cylindrical surfaces.
Errors
"cannot convert because shape is not a shell"
Well, your shell seems to have errors, maybe it is not closed (has holes). Since the capabilities of the mesh workbench in FreeCAD are a little limited at the moment, you might want to try examining and repairing of your model with third-party software. After doing that, you may try importing and converting of your model again.
Third Party Programs
- Meshlab
- License: Open Source (GPL V2)
- Runs on Windows 32/64 bit, Linux and Mac OS X
- netFabb basic
- License: Freeware
- Runs on Windows XP/7/8, Linux and Mac OS X