FreeCAD Build Tool/ru: Difference between revisions
Renatorivo (talk | contribs) (Created page with "Она отобразит меню, в котором вы можете выбрать задачу которую необходимо использовать для:") |
Renatorivo (talk | contribs) (Created page with "В ответ на запрос, введите абревеатуру той команды которую вы хотите вызвать. Например введите "...") |
||
Line 25: | Line 25: | ||
For help on the modules type: |
For help on the modules type: |
||
fcbt <command name> ? |
fcbt <command name> ? |
||
В ответ на запрос, введите абревеатуру той команды которую вы хотите вызвать. Например введите "CM" для [[Module Creation/ru|создания модуля]]. |
|||
At the input promt enter the abbreviated command you want to call. For example type "CM" for [[Module Creation|creating a module]]. |
|||
=== DistSrc === |
=== DistSrc === |
Revision as of 19:12, 16 October 2014
Инструмент сборки FreeCAD или fcbt это python сценарий расположеный в
trunc/src/Tools/fcbt.py
Он может быть использован для упрощения некоторых часто встречающихся задач при сборке, распространении и расширении FreeCAD.
Использование
В корректно установленом Python интепретаторе , может быть вызвана команда fcbt
python fbct.py
Она отобразит меню, в котором вы можете выбрать задачу которую необходимо использовать для:
FreeCAD Build Tool Usage: fcbt <command name> [command parameter] possible commands are: - DistSrc (DS) Build a source Distr. of the current source tree - DistBin (DB) Build a binary Distr. of the current source tree - DistSetup (DI) Build a Setup Distr. of the current source tree - DistSetup (DUI) Build a User Setup Distr. of the current source tree - DistAll (DA) Run all three above modules - NextBuildNumber (NBN) Increase the Build Number of this Version - CreateModule (CM) Insert a new FreeCAD Module in the module directory For help on the modules type: fcbt <command name> ?
В ответ на запрос, введите абревеатуру той команды которую вы хотите вызвать. Например введите "CM" для создания модуля.
DistSrc
The command "DS" creates a source distribution of the current source tree.
DistBin
The command "DB" creates a binary distribution of the current source tree.
DistSetup
The command "DI" creates a setup distribution of the current source tree.
DistSetup
The command "DUI" creates a user setup distribution of the current source tree.
DistAll
The command "DA" executes "DS", "DB" and "DI" in sequence.
NextBuildNumber
The "NBN" command increments the build number to create a new release version of FreeCAD.
CreateModule
The "CM" command creates a new application module.