FreeCAD Build Tool/it: Difference between revisions
Renatorivo (talk | contribs) (Created page with "che visualizza un menu, in cui è possibile selezionare l'operazione che si desidera utilizzare per:") |
Renatorivo (talk | contribs) (Created page with "Al prompt inserire il comando abbreviato che si desidera utilizzare. Ad esempio digitare "CM" per creare un modulo.") |
||
Line 26: | Line 26: | ||
For help on the modules type: |
For help on the modules type: |
||
fcbt <command name> ? |
fcbt <command name> ? |
||
Al prompt inserire il comando abbreviato che si desidera utilizzare. Ad esempio digitare "CM" per [[Module Creation/it|creare un modulo]]. |
|||
=== DistSrc === |
=== DistSrc === |
Revision as of 17:36, 16 October 2014
Lo Strumento per la costruzione di FreeCAD (FreeCAD build tool o fcbt) è uno script in Python ubicato in
trunc/src/Tools/fcbt.py
Può essere usato per semplificare alcune frequenti operazioni nella costruzione, distribuzione e estensione di FreeCAD.
Utilizzo
Con Python installato correttamente, fcbt può essere richiamato con il comando
python fbct.py
che visualizza un menu, in cui è possibile selezionare l'operazione che si desidera utilizzare per:
FreeCAD Build Tool Usage: fcbt <command name> [command parameter] possible commands are: - DistSrc (DS) Build a source Distr. of the current source tree - DistBin (DB) Build a binary Distr. of the current source tree - DistSetup (DI) Build a Setup Distr. of the current source tree - DistSetup (DUI) Build a User Setup Distr. of the current source tree - DistAll (DA) Run all three above modules - NextBuildNumber (NBN) Increase the Build Number of this Version - CreateModule (CM) Insert a new FreeCAD Module in the module directory For help on the modules type: fcbt <command name> ?
Al prompt inserire il comando abbreviato che si desidera utilizzare. Ad esempio digitare "CM" per creare un modulo.
DistSrc
The command "DS" creates a source distribution of the current source tree.
DistBin
The command "DB" creates a binary distribution of the current source tree.
DistSetup
The command "DI" creates a setup distribution of the current source tree.
DistSetup
The command "DUI" creates a user setup distribution of the current source tree.
DistAll
The command "DA" executes "DS", "DB" and "DI" in sequence.
NextBuildNumber
The "NBN" command increments the build number to create a new release version of FreeCAD.
CreateModule
The "CM" command creates a new application module.