Верстак Стандартные Изделия (Fasteners)

From FreeCAD Documentation
Revision as of 14:48, 2 October 2021 by Evgeniy (talk | contribs) (Created page with "* 32px Screw calculator: открывает калькулятор резьбы.")
Логотип верстака Fasteners

Введение

Верстак Fasteners (Стандартные Изделия) предназначен для быстрого и удобного добавления различных крепежных изделий. На данный момент является внешним верстаком.

Применение

Применить верстак достаточно легко:

  1. Установите верстак Fasteners через менеджер дополнений.
  2. Создайте новый документ в FreeCAD.
  3. Выберите верстак Fasteners из списка верстаков.
  4. После чего будут отображены панели инструментов, принадлежащие данному рабочему столу.

Простые примеры применения верстака: Нажатие на любую из кнопок с изображением стандартного изделия что бы создать это стандартное изделие в центре координат со свойствами по умолчанию. Для того, чтобы изменить свойства стандартного изделия, выберите его и откройте вкладку Data в редакторе свойств.

Известные проблемы

Справочные данные

Установка

This workbench can be installed from the Addon Manager. For manual installation see Installing more workbenches.

Панели инструментов

The Fasteners Workbench has two toolbars. The FS Screws toolbar contains many tools. If required it can be expanded by pressing the >> button.

Панель инструментов верстака Fasteners

Инструменты

Подробное описание смотрите по ссылке: http://theseger.com/projects/2015/06/fasteners-workbench-for-freecad/.

Команды

  • Invert fastener: меняет ориентацию крепежа на противоположную.
  • Simplify shape: преобразует объект в простую не параметрическую фигуру.
  • Generate BOM: генерирует спецификацию стандартных изделий.

Самозатягивающиеся крепёжные изделия и крепёжные изделия для Печатных Плат

  • Self-clinching metric nut.
  • Self-clinching metric standoff.
  • Self-clinching metric stud.
  • PCB Metric standoff Female/Male.
  • PCB Metric spacer Female/Female.

Крепежные изделия DIN, EN и ISO

  • ISO 4017 Hexagon head screw. Product grades A and B.
  • ISO 4014 Hexagon head bolt. Product grades A and B.
  • EN 1662 Hexagon head bolt with flange, small series.
  • EN 1665 Hexagon bolt with flange, heavy series.
  • ISO 4762 Hexagon socket head cap screw.
  • DIN 7984 Hexagon socket head cap screw with low head.
  • DIN 6912 Hexagon socket head cap screw with low head with center.
  • ISO 7380-1 Hexagon socket button head screw.
  • ISO 7380-2 Hexagon socket button head screw with collar.
  • ISO 10642 Hexagon socket countersunk head screw.
  • ISO 2009 Slotted countersunk flat head screw. Product grade A.
  • ISO 2010 Slotted raised countersunk head screw. Product grade A.
  • ISO 1580 Slotted pan head screw. Product grade A.
  • ISO 1207 Slotted cheese head screw. Product grade A.
  • DIN 967 Cross recessed pan head screw with collar.
  • ISO 7045 Pan head screw type H cross recess. Product grade A.
  • ISO 7046 Countersunk flat head screw H cross recess. Product grade A.
  • ISO 7047 Raised countersunk head screw H cross recess. Product grade A.
  • ISO 7048 Cheese head screw with type H cross recess.
  • ISO 14579 Hexalobular socket head cap screw.
  • ISO 14580 Hexalobular socket cheese head screw.
  • ISO 14582 Hexalobular socket countersunk head screw, high head.
  • ISO 14583 Hexalobular socket pan head screw.
  • ISO 14584 Hexalobular socket raised countersunk head screw.
  • ISO 7379 Hexagon socket head shoulder screw.
  • ISO 7089 Plain washer, normal series. Product grade A.
  • ISO 7090 Plain washer chamfered, normal series. Product grade A.
  • ISO 7092 Plain washer, small series.
  • ISO 7093-1 Plain washer, large series. Product grade A.
  • ISO 7094 Plain washer, extra large series.
  • ISO 4026 Hexagon socket set screw with flat point.
  • ISO 4027 Hexagon socket set screw with cone point.
  • ISO 4028 Hexagon socket set screw with dog point.
  • ISO 4029 Hexagon socket set screw with cup point.
  • ISO 4032 Hexagon nut, style 1. Product grades A and B.
  • ISO 4033 Hexagon nut, style 2. Product grades A and B.
  • ISO 4035 Hexagon thin nut, chamfered. Product grades A and B.
  • EN 1661 Hexagon nut with flange.
  • DIN 557 Square nut.
  • DIN 562 Square nut.
  • DIN 985 Nyloc nut.

Крепежные изделия ASME (American Society of Mechanical Engineers)

  • ASME B18.2.1.6 UNC Hex head screw.
  • ASME B18.2.1.8 UNC Hex head screw with flange.
  • ASME B18.2.2.1A UNC Machine screw nut.
  • ASME B18.2.2.4A UNC Hexagon nut.
  • ASME B18.2.2.4B UNC Hexagon thin nut.
  • ASME B18.3.1A UNC Hex socket head cap screw.
  • ASME B18.3.2 UNC Hex socket countersunk head screw.
  • ASME B18.3.3A UNC Hex socket button head screw.
  • ASME B18.3.3B UNC Hex socket button head screw with flange.
  • ASME B18.3.4 UNC Hexagon socket head shoulder screw.
  • ASME B18.3.5A UNC Hexagon socket set screw with flat point.
  • ASME B18.3.5B UNC Hexagon socket set screw with cone point.
  • ASME B18.3.5C UNC Hexagon socket set screw with dog point.
  • ASME B18.3.5D UNC Hexagon socket set screw with cup point.
  • ASME B18.6.3.1A UNC slotted countersunk flat head screw.
  • ASME B18.21.1.12A UN washer, narrow series.
  • ASME B18.21.1.12B UN washer, regular series.
  • ASME B18.21.1.12C UN washer, wide series.

Другие крепежные изделия

  • Arbitrary length threaded rod for tapping holes (metric).
  • Arbitrary length threaded rod for tapping holes (inch).
  • Arbitrary length threaded tube for cutting external threads (metric).
  • Arbitrary length threaded tube for cutting external threads (inch).
  • Arbitrary length DIN 975 threaded rod (metric).
  • Arbitrary length UNC threaded rod (inch).

Прочие

  • Fasteners Preferences
  • Fasteners Workbench icon

Ссылки связанные с верстаком

Другие ссылки