MES: Grupa siatki

Other languages:

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

FEM mesh region

Nodes set

FEM

Menu location
FEM MeshGroup
Mesh → FEM mesh group
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM tutorial

Description

FEM MeshGroup enables the user to create groups of Vertices, Edges, Surfaces and elements. It is useful in case of using FreeCAD as a pre-processor to export an organized and labeled mesh. The mesh is then usable by external solver codes, where mesh groups can be used more readily to set boundary conditions and attribute solver related properties. It is possible to use the FreeCAD mesh group object name or the label as the group name on export of the mesh. If the label is chosen, the user has to be mindful if special characters are used. If the mesh export format does not allow special character its fallback is to use the mesh group object name.

FEM MeshGroup therefore enables FreeCAD to be used with external solvers (or viewers such as ParaView) when they are not yet implemented with their own case-writing routine within FreeCAD.

Usage

To enable the function a mesh must be first provided FEM mesh from shape by Gmsh
Then select the Mesh object in the Tree view and either
- Press the button in the FEM toolbar
- Select the Mesh → FEM mesh group option from the drop-down menu.
Select whether the group is named or labeled
- If Name is selected, the name of the MeshGroup is used when exporting the mesh.
- If Label is selected, the specified label name will be used when exporting the mesh.
Click the OK button.
Close the task.
Result: You now should see a new FEMMeshGroup object under the FEMMeshGMSH object in your active analysis container.
Double-click on the FEMMeshGMSH parent object in your Model Tree and press Apply to force a mesh recalculation / relabeling.
Close the task.

Notes

After the mesh has been created you can change the label property using the property editor.
After you changed a property, you must reopen the Gmsh dialog again and click the Apply button. (You can leave the dialog open while changing properties.)
You can create as many different mesh groups as needed.

FEM mesh region

Nodes set

FEM

Środowisko pracy MES