FEM ElementGeometry2D/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "==Ограничения==")
(Created page with "==Свойства==")
Line 33: Line 33:
* Analysis combining shell elements with solid or edge elements is not supported in the current version (FreeCAD 0.18).
* Analysis combining shell elements with solid or edge elements is not supported in the current version (FreeCAD 0.18).


==Свойства==
==Properties==


{{PropertyData|Thickness}}: specifies the thickness of the shell.
{{PropertyData|Thickness}}: specifies the thickness of the shell.

Revision as of 20:47, 21 November 2020

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

FEM ElementGeometry2D

Системное название
FEM ElementGeometry2D
Расположение в меню
Model →Shell plate tickness
Верстаки
FEM
Быстрые клавиши
C S
Представлено в версии
-
См. также
FEM tutorial

Описание

ElementGeometry2D is used to define thickness of 2D FEM elements, all or laying on the chosen surface.

Использование

  1. Press the FEM ElementGeometry2D button, or press C then S keys.
  2. Define a thickness parameter.
  3. Optionally click Add in the Task panel and then click on the face you want to have prescribed thickness. If the face selection is free, all remaining faces (which thickness is not defined by other FEM ElementGeometry2D objects) will be automatically assigned.

Ограничения

  • Analysis combining shell elements with solid or edge elements is not supported in the current version (FreeCAD 0.18).

Свойства

ДанныеThickness: specifies the thickness of the shell.

Scripting

Notes

For viewing results from CalculiX solver on the mesh expanded to the prescribed thickness, property Beam Shell Result Output 3D in the FEM SolverCalculixCxxtools need to be set to True.