FEM Одномерная секция для текучего вещества

From FreeCAD Documentation
Revision as of 14:05, 24 November 2021 by Roy 043 (talk | contribs)

FEM ElementFluid1D

Системное название
FEM ElementFluid1D
Расположение в меню
Model → Fluid section for 1D flow
Верстаки
FEM
Быстрые клавиши
Нет
Представлено в версии
-
См. также
FEM tutorial

Описание

Создает элемент жидкостной секции МКЭ для пневматических и гидравлических сетей.

Использование

  1. There are several ways to invoke the command:
    • Press the FEM ElementFluid1D button.
    • Select the Model → Element Geometry → Fluid section for 1D flow option from the menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Ограничения

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Примечания

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html