FEM Одномерная секция для текучего вещества

From FreeCAD Documentation
Revision as of 20:51, 21 November 2020 by Baritone (talk | contribs) (Created page with "==Ограничения==")

FEM ElementFluid1D

Системное название
FEM ElementFluid1D
Расположение в меню
Model → Fluid section for 1D flow
Верстаки
FEM
Быстрые клавиши
Нет
Представлено в версии
-
См. также
FEM tutorial

Описание

Creates a FEM fluid section element for pneumatic and hydraulic networks

Использование

  1. Click on or choose Model Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Ограничения

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html