FEM ElementFluid1D: Difference between revisions

From FreeCAD Documentation
mNo edit summary
(Marked this version for translation)
Line 5: Line 5:
==Description== <!--T:2-->
==Description== <!--T:2-->


<!--T:6-->
Creates a FEM fluid section element for aerodynamic and hydraulic networks
Creates a FEM fluid section element for aerodynamic and hydraulic networks


==Use== <!--T:3-->
==Use== <!--T:3-->


<!--T:7-->
#Click on [[Image:FEM ElementFluid1D.png ‎|32px]] or choose {{KEY| FEM}} → {{KEY|[[Image:FEM ElementFluid1D.png ‎|32px]] Fluid section for 1D flow}} from the top menu.
#Click on [[Image:FEM ElementFluid1D.png ‎|32px]] or choose {{KEY| FEM}} → {{KEY|[[Image:FEM ElementFluid1D.png ‎|32px]] Fluid section for 1D flow}} from the top menu.
#Select Fluid type: Liquid, Gas or Open Channel
#Select Fluid type: Liquid, Gas or Open Channel
Line 17: Line 19:
==Limitations== <!--T:4-->
==Limitations== <!--T:4-->


<!--T:8-->
#The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html
#The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html


==Notes== <!--T:5-->
==Notes== <!--T:5-->


<!--T:9-->
#An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
#An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
# The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html
# The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html

Revision as of 13:50, 25 February 2018

FEM ElementFluid1D

Menu location
FEM → Fluid section for 1D flow
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM tutorial

Description

Creates a FEM fluid section element for aerodynamic and hydraulic networks

Use

  1. Click on or choose FEM Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html