Difference between revisions of "FEM ElementFluid1D"

From FreeCAD Documentation
Jump to navigation Jump to search
m
(Marked this version for translation)
Line 5: Line 5:
 
==Description== <!--T:2-->
 
==Description== <!--T:2-->
  
 +
<!--T:6-->
 
Creates a FEM fluid section element for aerodynamic and hydraulic networks
 
Creates a FEM fluid section element for aerodynamic and hydraulic networks
  
 
==Use== <!--T:3-->
 
==Use== <!--T:3-->
  
 +
<!--T:7-->
 
#Click on [[Image:FEM ElementFluid1D.png ‎|32px]] or choose {{KEY| FEM}}  →  {{KEY|[[Image:FEM ElementFluid1D.png ‎|32px]] Fluid section for 1D flow}}  from the top menu.
 
#Click on [[Image:FEM ElementFluid1D.png ‎|32px]] or choose {{KEY| FEM}}  →  {{KEY|[[Image:FEM ElementFluid1D.png ‎|32px]] Fluid section for 1D flow}}  from the top menu.
 
#Select Fluid type: Liquid, Gas or Open Channel
 
#Select Fluid type: Liquid, Gas or Open Channel
Line 17: Line 19:
 
==Limitations== <!--T:4-->
 
==Limitations== <!--T:4-->
  
 +
<!--T:8-->
 
#The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html
 
#The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html
  
 
==Notes== <!--T:5-->
 
==Notes== <!--T:5-->
  
 +
<!--T:9-->
 
#An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html  
 
#An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html  
 
# The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html
 
# The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html

Revision as of 13:50, 25 February 2018

FEM ElementFluid1D.png FEM ElementFluid1D

Menu location
FEM → Fluid section for 1D flow
Workbenches
FEM
Default shortcut
Introduced in version
-
See also
FEM tutorial


Description

Creates a FEM fluid section element for aerodynamic and hydraulic networks

Use

  1. Click on FEM ElementFluid1D.png or choose FEMFEM ElementFluid1D.png Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html
Other languages:
English • ‎français • ‎italiano • ‎română