FEM ConstraintHeatflux
FEM ConstraintHeatflux |
Menu location |
---|
Model → Thermal Constraints → Constraint heatflux |
Workbenches |
FEM |
Default shortcut |
None |
Introduced in version |
- |
See also |
FEM tutorial |
Description
This constraint specifies film heat transfer of a surface at temperature T and with a film coefficient h to the environment or sink at temperature T0 . The convective heat flux q will satisfy: q = h(T -T0)
Use
- Click on or choose Model → Thermal Constraints → Constraint heatflux from the top menu.
- Select in the 3D-view the surface(s) the constraint should be applied to.
- Enter the desired surface temperature, film coefficient and environment temperature.
Limitations
Notes
- The constraint uses the *FILM card in CalculiX. The heatflux constraint is explained at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node203.html