FEM ConstraintForce/fr

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

FEM ConstraintForce
Emplacement du menu
Model → Mechanical Constraints → Constraint force
Ateliers
FEM
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
FEM tutorial

Description

Cette commande applique une force de valeur donnée [N] à la géométrie cible sélectionnée.

Utilisation

1) Applying a force in normal direction to a face

• • In FEM workbench, click on or select Model → Mechanical Constraints → Constraint force to open Force Constraint properties dialog

• • If you have Mesh displayed, you need to hide it (select the mesh object and press spacebar or right click and select Hide item) and show the original model.
  • Click on a face to which a force should be applied. It will appear in the list of geometrical objects.
  • Fill in Line load with a force value in [N] (attention: Not in [N/m])

• • Direction: In a typical case, you'll click this field empty to apply a force in normal direction to the face. You can revert the direction of the force by clicking Reverse direction. In other cases, you need to pick a face or plane, which is in normal to the force direction (it could differ from the face, to which the force is being applied)
  • Click Close to finish the dialog and create ConstraintForce object

2) Applying a force in to line in selected direction

• • In FEM workbench, click on or select Model → Mechanical Constraints → Constraint force to open Force Constraint properties dialog
  • If you have Mesh displayed, you need to hide it (select the mesh object and press spacebar or right click and select Hide item) and show the original model.
  • Click on a line segment to which a force should be applied. It will appear in the list of geometrical objects.
  • Fill in Area load with a force value in [N]
  • Direction: Now, with line segment selected, it si likely that the force is applied in a wrong direction. We need to specify the direction by clicking the button Direction and then clicking a face pointing with its normal to the direction of the force (or reversed direction). Again, you can revert the direction of the force by clicking Reverse direction.

• • Click Close to finish the dialog and create ConstraintForce object