FEM ConstraintFlowVelocity/ru

From FreeCAD Documentation
Revision as of 14:05, 24 November 2021 by Roy 043 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:
English • ‎français • ‎italiano • ‎polski • ‎русский

Fem-constraint-flow-velocity.svg FEM ConstraintFlowVelocity

Системное название
FEM ConstraintFlowVelocity
Расположение в меню
Model → Fluid constraints → Constraint flow velocity
Быстрые клавиши
Представлено в версии
См. также
FEM tutorial


Устанавливает скорость потока в качестве граничного условия к кромке в 2D или к грани в 3D.

FEM-constraint-flow-velocity task-panel.png

Constraint flow velocity menus within the task panel


  1. There are several ways to invoke the command:
    • Press the FEM ConstraintFlowVelocity.svg FEM ConstraintFlowVelocity button.
    • Select the Model → Fluid Constraints → FEM ConstraintFlowVelocity.svg Constraint flow velocity option from the menu.
  2. The task panel will display menus for constraint flow velocity
  3. Select the target Edges or Faces.
  4. Press the Add button.
  5. Deselect "unspecified" to activate the necessary fields for edition.
  6. Fill in the values in mm/s for the main Cartesian components.


  • Vector components that are ticked as "unspecified" will be interpolated by the selected solver.
    Any vector that should be the result of the solver must be ticked as "unspecified".
  • If the target face or edge is not aligned with the main cartesian coordinate system, it is possible to tick "normal to boundary".
    If "normal to boundary" is ticked, the normal vector to the selected edge or face is X and it will be oriented away from the mesh domain.
    For example, if a flow of 20 mm/s of air must enter the domain, then after ticking "normal to boundary" the user will have to input -20 mm/s in the "velocity X" field.
  • For a Wall with non-slip condition, the flow will be (0,0,0)
  • For a Symmetry condition, the flow will be (0, Unspecified, Unspecified) if "normal to boundary" is ticked.