# Difference between revisions of "FCGear InvoluteGear"

(Rephrased the computed properties section, giving more details and avoiding repetition) |
(Added another calculated property: "transverse_pitch", introduced ca. one year ago) |
||

Line 60: | Line 60: | ||

* {{PropertyData|df}}: Root diameter, measured at the foot of the teeth. | * {{PropertyData|df}}: Root diameter, measured at the foot of the teeth. | ||

* {{PropertyData|dw}}: Working pitch diameter. | * {{PropertyData|dw}}: Working pitch diameter. | ||

+ | * {{PropertyData|transverse_pitch}}: Pitch in the plane of rotation. | ||

<!--T:14--> | <!--T:14--> |

## Revision as of 20:51, 16 June 2021

FCGear InvoluteGear |

Menu location |
---|

FCGear → Create an Involute gear |

Workbenches |

FCGear |

Default shortcut |

None |

Introduced in version |

v0.16 |

See also |

FCGear CycloideGear |

## Description

Due to the favourable meshing ratio and the relatively simple production, involute gearing is the most common tooth form in mechanical engineering. Gear wheels can be found wherever movement and force are to be transferred from one part to another. For example, they can be found in machines, cars, watches or household appliances. The movement is often transferred directly from one gear wheel to the other, but sometimes also via a chain. In addition, the direction of rotation can be changed. It is also possible to change a radial movement into a linear one via Involute Rack ( Create an Involute rack).

## Usage

- Switch to the FCGear Workbench.
- Invoke the command several way:
- Press the Create an Involute gear button in the tool bar.
- Using the
**Gear Menu → Involute gear**.

- Change the gear parameter to the required conditions (see
*Properties → Data*below).

## Properties

### Data

Base

- Data
**Placement**: Placement is the location and orientation of an object in space. - Data
**Label**: User name of the object in the Tree view.

computed (All properties in this group are calculated automatically and thus read only)

- Data
**da**: Outside diameter, measured at the addendum (the tip of the teeth). - Data
**df**: Root diameter, measured at the foot of the teeth. - Data
**dw**: Working pitch diameter. - Data
**transverse_pitch**: Pitch in the plane of rotation.

gear_parameter

- Data
**beta**: With the helix angle β a helical gear is created – positive value → rotation direction right, negative value → rotation direction left (see also the information in*Notes*). - Data
**clearance**: Default is 0,25 (see also the information in*Notes*). - Data
**double_gear**:*True*creates a double helix gear (see also the information in*Notes*) - Data
**head**: Default is 0,00. This value is used to change the tooth height. - Data
**height**: Value of the gear width. - Data
**module**: Module is the ratio of the reference diameter of the gear divided by the number of teeth (see also the information in*Notes*). - Data
**numpoints**: Default is 6, change of the involute profile. Changing the value can lead to unexpected results. - Data
**properties_from_tool**: If helix angle β is given and*properties_from-tool*is enabled, gear parameters are internally recomputed for the rotated gear. - Data
**shift**: Default is 0,00, generates a positive and negative profile shift (see also the information in*Notes*). - Data
**simple**:*True*generates a simplified display (without teeth and only a cylinder in pitch diameter). - Data
**teeth**: Number of teeth (see also the information in*Notes*) - Data
**undercut**:*True*changes the profil of the tooth root (see also the information in*Notes*).

involute_parameter

- Data
**pressure_parameter**: Default is 20 (see also the information in*Notes*).

tolerance

- Data
**backslash**: Default is 0,00. Backlash, also called lash or play, is the distance between the teeths at a gear pair. - Data
**reversed_backslash**:*True*backlash decrease or*False*backlash increase (see also the information in*Notes*).

### View

The parameter descriptions of the *View* tab will be found in Property editor, further below at *Example of the properties of a PartDesign object*.

## Notes

*beta*: When*beta*is changed,*pitch diameter*also changes. The following formula illustrates how the parameters interact: d = m * Z / cos beta (Z = number of teeth, d = pitch diameter, m = module). This means for the spur gear: cos beta = 0 and for the helical gear: cos beta > 0. However, a helix angle of less than 10° has hardly any advantages over straight teeth.*clearance*: At a gear pair, clearance is the distance between the tooth tip of the first gear and the tooth root of the second gear.*double_gear*: To use the double helical gearing the helix angle β (*beta*) for the helical gearing must first be entered.*module*: Using ISO (International Organization for Standardization) guidelines, Module size is designated as the unit representing gear tooth-sizes. Module (m): m = 1 (p = 3.1416), m = 2 (p = 6.2832), m = 4 (p = 12.566). If you multiply Module by Pi, you can obtain Pitch (p). Pitch is the distance between corresponding points on adjacent teeth.*shift*: Profile shift is not merely used to prevent undercut. It can be used to adjust center distance between two gears. If a positive correction is applied, such as to prevent undercut in a pinion, the tooth thickness at top is thinner.*teeth*: If the number of teeth is changed, the pitch diameter also changes (*dw*).*undercut*: Undercut is used when the number of teeth of a gear is too small. Otherwise the mating gear will cut into the tooth root. The undercut not only weakens the tooth with a wasp-like waist, but also removes some of the useful involute adjacent to the base circle.*pressure_parameter*: 20° is a standard value here. The pressure angle is defined as the angle between the line-of-action (common tangent to the base circles) and a perpendicular to the line-of-centers. Thus, for standard gears, 14.5° pressure angle gears have base circles much nearer to the roots of teeth than 20° gears. It is for this reason that 14.5° gears encounter greater undercutting problems than 20° gears. Important. the pressure angle changes with a profile shift. Only change the parameter, if sufficient knowledge of the gear geometry is available.*reversed_backslash*: If there are several gears, pay attention to which gear the parameter is set for.

## Limitations

Limitation are not known yet.

## Useful formulas

**External gearing***addendum diameter*=*module***(teeth +2 )**dedendum diameter*=*pitch diameter (dw)*- 2 * (*module*+*clearance*)*axle base*=*module***(teeth 1 + 2)*: 2

**External and internal gearing***number of teeth*=*pitch diameter (dw)*: module*tooth high*= 2 **module*+*clearance**clearance*=*0.1 * module*til*0.3 * module**module*=*pitch diameter (dw)*:*teeth*

**Internal gearing***addendum diameter*=*module***(teeth - 2)**dedendum diameter*=*pitch diameter (dw)*+ 2 * (*module*+*clearance*)*axle base*=*module***(teeth 1 - 2)*: 2

**Helical and double helical gearing***pitch diameter (dw)*=*module***teeth*:*cos beta**axle base*=*(pitch diameter (dw) 1 + 2)*: 2*addendum diameter*=*pitch diameter (dw)*+ 2 **module**module*=*pitch diameter (dw)***cos beta*:*teeth*

## Scripting

Use the power of python to automate your gear modeling:

```
import FreeCAD as App
import freecad.gears.commands
gear = freecad.gears.commands.CreateInvoluteGear.create()
gear.teeth = 20
gear.beta = 20
gear.height = 10
gear.double_helix = True
App.ActiveDocument.recompute()
Gui.SendMsgToActiveView("ViewFit")
```