FCGear CrownGear: Difference between revisions

From FreeCAD Documentation
(Marked this version for translation)
mNo edit summary
Line 50: Line 50:
#* Select the {{MenuCommand|Gear → [[File:FCGear_CrownGear.svg|16px]] Crown Gear}} option from the menu.
#* Select the {{MenuCommand|Gear → [[File:FCGear_CrownGear.svg|16px]] Crown Gear}} option from the menu.
# The crown gear is displayed without teeth by default. ({{Version| 1.0}})
# The crown gear is displayed without teeth by default. ({{Version| 1.0}})
# Change the gear parameters to the required conditions (see {{Emphasis|Properties → Data}} below).
# Change the gear parameters to the required conditions (see [[#Properties|Properties]]).
# Set the {{PropertyData|preview_mode}} property to {{false}} to display the teeth (see [[#Notes|notes]] below).
# Set the {{PropertyData|preview_mode}} property to {{false}} to display the teeth (see [[#Notes|Notes]]).


==Properties== <!--T:10-->
==Properties== <!--T:10-->
Line 72: Line 72:
<!--T:17-->
<!--T:17-->
* {{PropertyData|height|Length}}: Value for the tooth width.
* {{PropertyData|height|Length}}: Value for the tooth width.
* {{PropertyData|module|Length}}: Module is the ratio of the reference diameter of the gear divided by the number of teeth (see also the information in {{Emphasis|Note}}).
* {{PropertyData|module|Length}}: Module is the ratio of the reference diameter of the gear divided by the number of teeth (see [[#Notes|Notes]]).
* {{PropertyData|other_teeth|Integer}}: Number of teeth of the {{Emphasis|construction}} gear (pinion). See also the information in {{Emphasis|Note}}.
* {{PropertyData|other_teeth|Integer}}: Number of teeth of the {{Emphasis|construction}} gear (pinion) (see [[#Notes|Notes]]).
* {{PropertyData|teeth|Integer}}: Number of teeth
* {{PropertyData|teeth|Integer}}: Number of teeth
* {{PropertyData|thickness|Length}}: Height from the tip of tooth to the lower side of the crown wheel.
* {{PropertyData|thickness|Length}}: Height from the tip of tooth to the lower side of the crown wheel.
Line 81: Line 81:


<!--T:36-->
<!--T:36-->
* {{PropertyData|pressure_angle|Angle}}: Default is 20° (see also the information in {{Emphasis|Notes}}).
* {{PropertyData|pressure_angle|Angle}}: Default is 20° (see [[#Notes|Notes]]).


<!--T:37-->
<!--T:37-->

Revision as of 18:01, 28 September 2022

Other languages:

FCGear CrownGear

Menu location
Gear → Crown Gear
Workbenches
FCGear
Default shortcut
None
Introduced in version
v0.16
See also
FCGear InvoluteGear

Description

The crown wheel resembles a ring-shaped curved rack. The pressure angle decreases continuously from the outer to the inner diameter. Thus, the variable peripheral speed at the crown wheel is compensated against the constant peripheral speed of the pinion. The pointed outer teeth and the steep tooth flanks on the inner diameter limit the usable tooth width. Crown gears achieve similar efficiencies as spur gears. One crown gear can drive several pinions.

Known field of application of crown gears:

  • Rear axle drives for cars and motorcycles
  • Swivel mechanism for operating tables
  • Angular milling heads
  • Powered tool systems with multiple pinions and a crown gear

Above: Crown gear

Usage

  1. Switch to the FCGear Workbench.
  2. There are several ways to invoke the command:
    • Press the Crown Gear button in the toolbar.
    • Select the Gear → Crown Gear option from the menu.
  3. The crown gear is displayed without teeth by default. (introduced in version 1.0)
  4. Change the gear parameters to the required conditions (see Properties).
  5. Set the Datapreview_mode property to false to display the teeth (see Notes).

Properties

An FCGear CrownGear object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

accuracy

  • Datanum_profiles (Integer): Number of profiles used for loft.
  • Datapreview_mode (Bool):

base

  • Dataheight (Length): Value for the tooth width.
  • Datamodule (Length): Module is the ratio of the reference diameter of the gear divided by the number of teeth (see Notes).
  • Dataother_teeth (Integer): Number of teeth of the construction gear (pinion) (see Notes).
  • Datateeth (Integer): Number of teeth
  • Datathickness (Length): Height from the tip of tooth to the lower side of the crown wheel.

involute

  • Datapressure_angle (Angle): Default is 20° (see Notes).

version

  • Dataversion (String):

Notes

  • The Datapreview_mode property is set to true by default and when the gear is created you'll find this message in the report view:
    Gear module: Crown gear created, preview_mode = true for improved performance. Set preview_mode property to false when ready to cut teeth.
  • module: Using ISO (International Organization for Standardization) guidelines, Module size is designated as the unit representing gear tooth-sizes. Module (m): m = 1 (p = 3.1416), m = 2 (p = 6.2832), m = 4 (p = 12.566). If you multiply Module by Pi, you can obtain Pitch (p). Pitch is the distance between corresponding points on adjacent teeth.
  • other_teeth: Several pinions with the same number of teeth only can be used on one crown wheel.
  • pressure_parameter: Only change the parameter, if sufficient knowledge of the gear geometry is available.
  • The geometry of the crown gear is primarily determined by the spur pinion geometry (other_teeth).
  • Create spur gear with Involute gear. The number of teeth must be identical to the parameter other_teeth of the crown gear.
  • Adjustments for optimal running characteristics can be made with the parameters of involute gear.

Crown and spur gear set overview

  • (1) Spur gear
  • (2) Crown gear
  • (3) Tooth width
  • (4) Inner diameter
  • (5) Outer diameter

Useful formulas

  • Inner diameter (4)
    • inner diamter = module (spur gear) * teeth (crown gear) * cos pressure_paramter (pinion) : cos pressure_parameter (crown gear)
  • Outer diameter (5)
    • outer diamter = inner diameter + 2x height (tooth width crown gear)