Ingranaggio conico

From FreeCAD Documentation
Revision as of 19:36, 5 August 2020 by Renatorivo (talk | contribs) (Created page with "{{GuiCommand/it |Name=FCGear BevelGear |Name/it=Ingranaggio conico |MenuLocation=FCGear → Create a Bevel gear |Workbenches=FCGear |Shortcut=None |Ver...")
Other languages:

Ingranaggio conico

Posizione nel menu
FCGear → Create a Bevel gear
Ambiente
FCGear
Avvio veloce
None
Introdotto nella versione
0.16
Vedere anche
Nessuno

Description

Partly because of the noise they generate, bevel gears are not used as often as other types of gear. But they are still used in certain sectors, such as food packaging and canned food, lawn and garden equipment, machines such as drills and mills, compression systems for the gas and oil market and flow control valves.

Spiral bevel gears have curved teeth to provide softer engagement and greater tooth to tooth contact compared to a straight bevel gear. This reduces the vibration and noise. They can be used at high speeds and are typically used in motorcycle and bicycle transmissions.

From left to right: Spur gearing, spiral teeth

Usage

  1. Switch to the FCGear Workbench.
  2. Invoke the command several way:
  3. Change the gear parameter to the required conditions (see Properties → Data below).

Properties

Data

Base

  • DatiPlacement: Placement is the location and orientation of an object in space.
  • DatiLabel: User name of the object in the Tree view.

gear_parameter

  • Datibeta: With the angle β a helical bevel gear is created (positive value → rotation direction right, negative value → rotation direction left).

gear_parameter

  • Datibackslash: Default is 0,00. Backlash, also called lash or play, is the distance between the teeths at a gear pair.
  • Daticlearance: Default is 0,10 (see also the information in Note).
  • Datiheight: Value for the bevel gear width.
  • Datim: Module is the ratio of the reference diameter of the gear divided by the number of teeth (see also the information in Note).
  • Datinumpoints: Default is 6, change of the involute profile. Changing the value can lead to unexpected results.
  • Datireset_origin: If the value is True, the center of the axis is at the center of the bottom of the gear (see also the information in Note).
  • Datiteeth: Number of teeth.

involute_parameter

  • Datipitch_angel: Angle of taper.
  • Datipressure_parameter: Default is 20 (see also the information in Note).

View

The parameter descriptions of the View tab will be found in Property editor, further below at Example of the properties of a PartDesign object.

Notes

  • clearance: At a gear pair, clearance is the distance between the tooth tip of the first gear and the tooth root of the second gear.
  • module: Using ISO (International Organization for Standardization) guidelines, Module size is designated as the unit representing gear tooth-sizes. Module (m): m = 1 (p = 3.1416), m = 2 (p = 6.2832), m = 4 (p = 12.566). If you multiply Module by Pi, you can obtain Pitch (p). Pitch is the distance between corresponding points on adjacent teeth.
  • reset_origin: It can be advantageous for mounting purposes if the parameter is set to false. The origin of the body is then at the tip of the pitch cone.
  • pressure_parameter: Only change the parameter, if sufficient knowledge of the gear geometry is available.

Limitations

Limitation are not known yet.