Drawing Orthoviews/it: Difference between revisions

From FreeCAD Documentation
(Created page with "== Opzioni ==")
(Created page with "A seconda delle selezioni effettuate, alcune opzioni potrebbero non essere disponibili.")
Line 20: Line 20:
== Opzioni ==
== Opzioni ==


A seconda delle selezioni effettuate, alcune opzioni potrebbero non essere disponibili.
Depending on the selections made, some options may not be available.


[[File:Drawing_Orthoviews_Options.png|left|frame]]
[[File:Drawing_Orthoviews_Options.png|left|frame]]

Revision as of 16:35, 18 March 2018

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Descrizione

Viste ortogonali

Posizione nel menu
Drawing → Inserisci viste ortogonali
Ambiente
Drawing, Complete
Avvio veloce
none
Introdotto nella versione
-
Vedere anche
Nuovo disegno


Lo strumento Viste ortogonali inserisce una serie di proiezioni ortografiche dell'oggetto selezionato nel foglio di disegno attivo. Notare che non crea un singolo oggetto vista sulla pagina. Crea invece una proiezione ortografica separata per ciascuna delle viste selezionate nelle opzioni.

The Orthoviews tool creates all of the orthographic projections is the proper location for the given main view.

Utilizzo

  1. Selezionare una funzione nell'albero del modello.
  2. Se è presente più di una pagina, selezionare più volte la pagina desiderata (mantenendo la funzione selezionata).
  3. Premere il pulsante Inserisci viste ortogonali.
  4. Definire le opzioni di creazione della vista desiderate. Vedere le Opzioni.
  5. Fare clic su OK per creare le viste della funzione selezionata sulla pagina selezionata.

Opzioni

A seconda delle selezioni effettuate, alcune opzioni potrebbero non essere disponibili.

  • Projection: Select whether you want a third angle (default) or first angle projection
  • View from: Choose the axis that will face out of the drawing sheet toward the user.
  • Axis aligned right: Choose the axis that will point to the right on the drawing sheet. The remaining axis will be vertical on the page.
  • Secondary views: Choose the views that you wish to have created. The main view lies in the center of the checkboxes, and is oriented by the View from and Axis aligned right options. Secondary views will be created for each box that is checked.

General

  • Auto scale / position: If this box is checked, the view scale, location, and spacing will be chosen to best use the available space on the page. If this box is unchecked, the user specifies scale, location, and spacing.
  • Scale: The scale for the view, expressed as the denominator of a scale fraction. Thus, 2 will create a set of views scaled at 1:2.
  • Top left x / y: The location of the set of views from the top left of the page. Incresing the x value (first column) moves the views to the right. Increasing the y value (second column) moves the views down on the page.
  • Spacing dx / dy: The x (first column) and y (second column) spacings between adjacent views. The spacings are the spacing of the Part coordinate system; in most cases there will be less blank space between the views that the spacing value (as the views have x and y dimensions).
  • Show hidden lines: If selected, hidden lines will be visible in the created views.
  • Show smooth lines: If selected, show lines where curvature is discontinuous (for example, where a fillet connects to a flat part).

Properties

There are no properties for this command; the command creates properties for each of the individual views.

Scripting

Drawing Orthoviews is not called in scripting. The individual views created by the Drawing Orthoviews command can be created in scripts.

Limitations

To be added

Tutorials

To be added