Drawing Dimensioning Addon: Difference between revisions
(Information placed from Home, which at some point in time was the Home page of the Drawing Dimensioning Addon) |
(→Limitations: Added information from Linear dimensions which previously was a page describing the Drawing Dimensioning Addon.) |
||
Line 27: | Line 27: | ||
* only works with FreeCAD version 0.15 and newer |
* only works with FreeCAD version 0.15 and newer |
||
== Linear dimensions == |
|||
Linear dimensions / Linear dimension stack |
|||
Upon clicking on linear dimensions or linear dimension stack you will get a menu with different choices. |
|||
repeat: If checked the menu won't close after defining one dimension |
|||
Grid Options: allow you to snap the dimensions to a grid |
|||
grid on will toggle the visibility of the grid |
|||
spacing: will define the spacing of the main grid (default: 1 mm) |
|||
display period: will define how often the lines are displayed (default: 20) |
|||
color: line color of the grid lines |
|||
line width: line width of the grid lines (default: 0,15) |
|||
Unit Options: will define the units of the dimensions |
|||
Edit > Preferences > Unit: use same units as defined in FreeCAD preferences |
|||
mm: force units to be in mm |
|||
inch: force units to be in inch |
|||
m: force units to be in m |
|||
custom: use custum scaling of units (default: 1/mm) |
|||
Preferences: define preferences of the dimension appearence |
|||
compact: |
|||
format mask: changes the format of the dimension (default "%(value)3.3f"). Overwrite with manual text possible |
|||
arrows: changes arrow style (auto/in/out/off) |
|||
auto place text: place dimension text manually |
|||
comma: use comma instead of point |
|||
gap: (default: 2) |
|||
overshoot: (default: 1) |
|||
arrowL1: first Length of arrow (default: 3) |
|||
arrowL2: second length of arrow (default: 1) |
|||
arrowW: width of arrow (default: 2) |
|||
strokeWidth: change line with of dimension lines (default: 0,3) |
|||
lineColor: change color of dimension lines |
|||
text properties: choose font name, font size and color (default: Verdana, 3.6, red) |
|||
auto place offset: |
|||
Set as default: Accept settings as default |
|||
Tipps: |
|||
* changing the placement of the dimensions afterwards can be done by selecting the dimension in the tree view, and changing the values in the section "Placement Clicks" in the data tab |
|||
* changing the dimension to a half linear dimension ca be done by selecting the dimension in the tree view and setting the value for "half Dimension_linear" to true. The dimension will be using the half towrds the second click point |
|||
[[Category:User Documentation]] |
[[Category:User Documentation]] |
Revision as of 06:11, 8 December 2018
Introduction
Welcome to the FreeCAD_drawing_dimensioning wiki! Intended work-flow:
- create a drawing page and a drawing of the part using the drawing workbench
- switch to the drawing dimensioning workbench to add dimensions to that drawing
The Drawing dimensioning workbench adds powerful dimensioning and annotation tools to the Drawing Workbench (see forum thread).
Features
- linear dimensioning
- circular and radial dimensioning
- angular dimension
- center lines
- adding, editing and moving dimension text
- deleting dimensions
- draw a dimension or a symbol anywhere on the drawing with "Add grab point"
Limitations
- no parametric updating, if the drawing is updated the dimensions need to be redone
- only works with FreeCAD version 0.15 and newer
Linear dimensions
Linear dimensions / Linear dimension stack
Upon clicking on linear dimensions or linear dimension stack you will get a menu with different choices. repeat: If checked the menu won't close after defining one dimension Grid Options: allow you to snap the dimensions to a grid
grid on will toggle the visibility of the grid
spacing: will define the spacing of the main grid (default: 1 mm)
display period: will define how often the lines are displayed (default: 20)
color: line color of the grid lines
line width: line width of the grid lines (default: 0,15) Unit Options: will define the units of the dimensions
Edit > Preferences > Unit: use same units as defined in FreeCAD preferences
mm: force units to be in mm
inch: force units to be in inch
m: force units to be in m
custom: use custum scaling of units (default: 1/mm) Preferences: define preferences of the dimension appearence
compact:
format mask: changes the format of the dimension (default "%(value)3.3f"). Overwrite with manual text possible
arrows: changes arrow style (auto/in/out/off)
auto place text: place dimension text manually
comma: use comma instead of point
gap: (default: 2)
overshoot: (default: 1)
arrowL1: first Length of arrow (default: 3)
arrowL2: second length of arrow (default: 1)
arrowW: width of arrow (default: 2)
strokeWidth: change line with of dimension lines (default: 0,3)
lineColor: change color of dimension lines
text properties: choose font name, font size and color (default: Verdana, 3.6, red)
auto place offset:
Set as default: Accept settings as default
Tipps:
- changing the placement of the dimensions afterwards can be done by selecting the dimension in the tree view, and changing the values in the section "Placement Clicks" in the data tab
- changing the dimension to a half linear dimension ca be done by selecting the dimension in the tree view and setting the value for "half Dimension_linear" to true. The dimension will be using the half towrds the second click point