Draft Snap WorkingPlane/ru

From FreeCAD Documentation
Revision as of 20:43, 2 March 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Draft WorkingPlane

Системное название
Draft WorkingPlane
Расположение в меню
Черчение → Привязка → К рабочей плоскости
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Всегда помещает захваченную точку на текущую рабочую поверхность, даже если захвачена точка вне рабочей плоскости.

This method always places a new point on the current working plane, even if you also use another snapping method and select a point outside of that working plane.

In other words, it projects an external snapping point to the current working plane.

Snapping the second point of a line to one endpoint of an edge of a body, which is then projected on the XY working plane

Использование



  1. Make sure the working plane is set with Draft SelectPlane.
  2. Make sure File:Snap Lock.svg Draft ToggleSnap and File:Snap WorkingPlane.svg Snap WorkingPlane are turned on.
  3. Optionally turn on any other Draft Snap method.
  4. Choose a Draft tool to draw a shape.
  5. Move the cursor over any line, edge, vertex, or object, like you would do with other snapping methods.
  6. A small white circle will indicate the point on the working plane to which your new point will be attached.
  7. Click to attach your new point.