Draft Snap WorkingPlane

From FreeCAD Documentation
Revision as of 04:18, 23 November 2018 by Vocx (talk | contribs) (Image caption)

Draft WorkingPlane

Menu location
Draft → Snap → WorkingPlane
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft SelectPlane

Description

This method always places the new point on the current working plane, even if you also use another snapping method and select a point outside of that working plane. In other words, it projects a snapping point to the current working plane.

Snapping the second point of a line to one endpoint of an edge of a body, which is then projected on the XY working plane

How to use

  1. Select wanted working plane.
  2. Select WorkingPlane from snapping tools.

Notes