Draft Workbench/tr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 40: Line 40:
* [[Image:Draft_Wire.svg|32px]] [[Draft_Wire|Polyline]]: creates a polyline, a sequence of several connected line segments.
* [[Image:Draft_Wire.svg|32px]] [[Draft_Wire|Polyline]]: creates a polyline, a sequence of several connected line segments.


* [[Image:Draft_Fillet.svg|32px]] [[Draft_Fillet|Fillet]]: creates a fillet, a rounded corner, or a chamfer, a straight edge, between two [[Draft_Line|Draft Lines]]. {{Version|0.19}}
* [[Image:Draft_Fillet.svg|32px]] [[Draft_Fillet|Fillet]]: creates a fillet, a rounded corner, or a chamfer, a straight edge, between two [[Draft_Line|Draft Lines]].


* [[Image:Draft_Arc.svg|32px]] Arc tools
* [[Image:Draft_Arc.svg|32px]] Arc tools
Line 46: Line 46:
:* [[Image:Draft_Arc.svg|32px]] [[Draft_Arc|Arc]]: creates a circular arc from a center, a radius, a start angle and an aperture angle.
:* [[Image:Draft_Arc.svg|32px]] [[Draft_Arc|Arc]]: creates a circular arc from a center, a radius, a start angle and an aperture angle.


:* [[Image:Draft_Arc_3Points.svg|32px]] [[Draft_Arc_3Points|Arc by 3 points]]: creates a circular arc from three points that define its circumference. {{Version|0.19}}
:* [[Image:Draft_Arc_3Points.svg|32px]] [[Draft_Arc_3Points|Arc by 3 points]]: creates a circular arc from three points that define its circumference.


* [[Image:Draft_Circle.svg|32px]] [[Draft_Circle|Circle]]: creates a circle from a center and a radius.
* [[Image:Draft_Circle.svg|32px]] [[Draft_Circle|Circle]]: creates a circle from a center and a radius.
Line 60: Line 60:
* [[Image:Draft_CubicBezCurve.svg|32px]] Bézier tools
* [[Image:Draft_CubicBezCurve.svg|32px]] Bézier tools


:* [[Image:Draft_CubicBezCurve.svg|32px]] [[Draft_CubicBezCurve|Cubic Bézier curve]]: creates a Bézier curve of the third degree. {{Version|0.19}}
:* [[Image:Draft_CubicBezCurve.svg|32px]] [[Draft_CubicBezCurve|Cubic Bézier curve]]: creates a Bézier curve of the third degree.


:* [[Image:Draft_BezCurve.svg|32px]] [[Draft_BezCurve|Bézier curve]]: creates a Bézier curve from several points.
:* [[Image:Draft_BezCurve.svg|32px]] [[Draft_BezCurve|Bézier curve]]: creates a Bézier curve from several points.
Line 80: Line 80:
* [[Image:Draft_Label.svg|32px]] [[Draft_Label|Label]]: creates a multi-line text with a 2-segment leader line and an arrow.
* [[Image:Draft_Label.svg|32px]] [[Draft_Label|Label]]: creates a multi-line text with a 2-segment leader line and an arrow.


* [[Image:Draft_AnnotationStyleEditor.svg|32px]] [[Draft_AnnotationStyleEditor|Annotation styles...]]: allows you to define styles that affect the visual properties of annotation-like objects. {{Version|0.19}}
* [[Image:Draft_AnnotationStyleEditor.svg|32px]] [[Draft_AnnotationStyleEditor|Annotation styles...]]: allows you to define styles that affect the visual properties of annotation-like objects.


== Modification ==
== Modification ==
Line 102: Line 102:
* [[Image:Draft_OrthoArray.svg|32px]] Array tools
* [[Image:Draft_OrthoArray.svg|32px]] Array tools


:* [[Image:Draft_OrthoArray.svg|32px]] [[Draft_OrthoArray|Array]]: creates an orthogonal array from a selected object. It can optionally create a [[App_Link|Link]] array. {{Version|0.19}}
:* [[Image:Draft_OrthoArray.svg|32px]] [[Draft_OrthoArray|Array]]: creates an orthogonal array from a selected object. It can optionally create a [[App_Link|Link]] array.


:* [[File:Draft_PolarArray.svg|32px]] [[Draft_PolarArray|Polar array]]: creates an array from a selected object by placing copies along a circumference. It can optionally create a [[App_Link|Link]] array. {{Version|0.19}}
:* [[File:Draft_PolarArray.svg|32px]] [[Draft_PolarArray|Polar array]]: creates an array from a selected object by placing copies along a circumference. It can optionally create a [[App_Link|Link]] array.


:* [[File:Draft_CircularArray.svg|32px]] [[Draft_CircularArray|Circular array]]: creates an array from a selected object by placing copies along concentric circumferences. It can optionally create a [[App_Link|Link]] array. {{Version|0.19}}
:* [[File:Draft_CircularArray.svg|32px]] [[Draft_CircularArray|Circular array]]: creates an array from a selected object by placing copies along concentric circumferences. It can optionally create a [[App_Link|Link]] array.


:* [[Image:Draft_PathArray.svg|32px]] [[Draft_PathArray|Path array]]: creates an array from a selected object by placing copies along a path.
:* [[Image:Draft_PathArray.svg|32px]] [[Draft_PathArray|Path array]]: creates an array from a selected object by placing copies along a path.


:* [[Image:Draft_PathLinkArray.svg|32px]] [[Draft_PathLinkArray|Path Link array]]: idem, but create a [[App_Link|Link]] array instead of a regular array. {{Version|0.19}}
:* [[Image:Draft_PathLinkArray.svg|32px]] [[Draft_PathLinkArray|Path Link array]]: idem, but create a [[App_Link|Link]] array instead of a regular array.


:* [[Image:Draft_PointArray.svg|32px]] [[Draft_PointArray|Point Array]]: creates an array from a selected object by placing copies at the points from a point compound.
:* [[Image:Draft_PointArray.svg|32px]] [[Draft_PointArray|Point Array]]: creates an array from a selected object by placing copies at the points from a point compound.


:* [[File:Draft_PointLinkArray.svg|32px]] [[Draft_PointLinkArray|Point Link array]]: idem, but create a [[App_Link|Link]] array instead of a regular array. {{Version|0.19}}
:* [[File:Draft_PointLinkArray.svg|32px]] [[Draft_PointLinkArray|Point Link array]]: idem, but create a [[App_Link|Link]] array instead of a regular array.


* [[Image:Draft_Edit.svg|32px]] [[Draft_Edit|Edit]]: puts selected objects in Draft Edit mode. In this mode the properties of objects can be edited graphically.
* [[Image:Draft_Edit.svg|32px]] [[Draft_Edit|Edit]]: puts selected objects in Draft Edit mode. In this mode the properties of objects can be edited graphically.
Line 146: Line 146:
* [[Image:Draft_tray_button_plane.png]] [[Draft_SelectPlane|Select Plane]]: selects the current Draft working plane. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_SelectPlane.svg|16px]] Select Plane}}.
* [[Image:Draft_tray_button_plane.png]] [[Draft_SelectPlane|Select Plane]]: selects the current Draft working plane. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_SelectPlane.svg|16px]] Select Plane}}.


* [[Image:Draft_tray_button_style.png]] [[Draft_SetStyle|Set style]]: sets the default style for new objects. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_SetStyle.svg|16px]] Set style}}. {{Version|0.19}}
* [[Image:Draft_tray_button_style.png]] [[Draft_SetStyle|Set style]]: sets the default style for new objects. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_SetStyle.svg|16px]] Set style}}.


* [[Image:Draft_tray_button_construction.png]] [[Draft_ToggleConstructionMode|Toggle construction mode]]: switches Draft construction mode on or off. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_ToggleConstructionMode.svg|16px]] Toggle construction mode}}.
* [[Image:Draft_tray_button_construction.png]] [[Draft_ToggleConstructionMode|Toggle construction mode]]: switches Draft construction mode on or off. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_ToggleConstructionMode.svg|16px]] Toggle construction mode}}.
Line 154: Line 154:
== Draft annotation scale widget ==
== Draft annotation scale widget ==


With the [[Draft_annotation_scale_widget|Draft annotation scale widget]] the Draft annotation scale can be specified. {{Version|0.19}}
With the [[Draft_annotation_scale_widget|Draft annotation scale widget]] the Draft annotation scale can be specified.


[[Image:Draft_annotation_scale_widget_button.png]]
[[Image:Draft_annotation_scale_widget_button.png]]
Line 160: Line 160:
== Draft snap widget ==
== Draft snap widget ==


The [[Draft_snap_widget|Draft snap widget]] can be used as an alternative for the [[#Draft_Snap_toolbar|Draft Snap toolbar]]. {{Version|0.19}}
The [[Draft_snap_widget|Draft snap widget]] can be used as an alternative for the [[#Draft_Snap_toolbar|Draft Snap toolbar]].


[[Image:Draft_snap_widget_button.png]]
[[Image:Draft_snap_widget_button.png]]
Line 202: Line 202:
== Yararlı ek araçlar ==
== Yararlı ek araçlar ==


* [[Image:Draft_Layer.svg|32px]] [[Draft_Layer|Layer]]: creates a [[Draft_Layer|Draft Layer]]. {{Version|0.19}}
* [[Image:Draft_Layer.svg|32px]] [[Draft_Layer|Layer]]: creates a [[Draft_Layer|Draft Layer]].


* [[Image:Draft_AddNamedGroup.svg|32px]] [[Draft_AddNamedGroup|Add a new named group]]: creates a named [[Std_Group|Std Group]] and moves selected objects to that group. {{Version|0.20}}
* [[Image:Draft_AddNamedGroup.svg|32px]] [[Draft_AddNamedGroup|Add a new named group]]: creates a named [[Std_Group|Std Group]] and moves selected objects to that group. {{Version|0.20}}
Line 255: Line 255:
For a [[Draft_Layer|Draft LayerContainer]] these additional options are available:
For a [[Draft_Layer|Draft LayerContainer]] these additional options are available:


* [[Image:Draft_Layer.svg|32px]] [[Draft_Layer#Layer_container_options|Merge layer duplicates]]: merges all layers with the same base label. This does not work in FreeCAD version 0.19.
* [[Image:Draft_Layer.svg|32px]] [[Draft_Layer#Layer_container_options|Merge layer duplicates]]: merges all layers with the same base label.


* [[Image:Draft_NewLayer.svg|32px]] [[Draft_Layer#Layer_container_options|Add new layer]]: adds a new layer to the current document.
* [[Image:Draft_NewLayer.svg|32px]] [[Draft_Layer#Layer_container_options|Add new layer]]: adds a new layer to the current document.
Line 331: Line 331:
</div>
</div>


The workbench includes a module to create samples of all objects in a new document. {{Version|0.19}}
The workbench includes a module to create samples of all objects in a new document.


Use this to test that all objects are produced correctly:
Use this to test that all objects are produced correctly:

Revision as of 08:20, 25 July 2022

Other languages:
Draft workbench icon

Introduction

Giriş

Taslak Tezgahı, basit 2D nesneler çizmenize izin verir ve daha sonra bunları değiştirmek için birkaç araç sunar. Ayrıca, geometrinizin konumunu tam olarak kontrol etmek için bir çalışma düzlemi, bir ızgara ve bir bağlama sistemi tanımlamak için araçlar sağlar.

Oluşturulan 2D nesneler genel çizim için Inkscape veya Autocad'e benzer bir şekilde kullanılabilir. Bu 2D şekiller ayrıca diğer tezgahlarla oluşturulan 3D nesnelerin temel bileşenleri olarak da kullanılabilir, örneğin, Parça tezgahı ve Mimari tezgah gibi. Taslak nesnelerin Eskiz tezgahı 'na dönüştürülmesi de mümkündür; bu, şekillerden katı cisimlerin oluşturulması için Parça tasarım tezgahı ile de kullanılabileceği anlamına gelir.

The Draft Workbench also provides tools to define a working plane, a grid, and a snapping system to precisely control the position of geometry.

FreeCAD öncelikle bir 3D modelleme uygulamasıdır ve bu nedenle 2D araçları diğer çizim programlarındaki kadar gelişmiş değildir. Öncelikli hedefiniz karmaşık 2D çizimler ve DXF dosyalarının üretimi ise ve 3D modellemeye gerek duymuyorsanız, teknik taslaklar için LibreCAD, QCad,TurboCad ve diğerleri gibi özel bir yazılım programı düşünebilirsiniz.

The image shows the grid aligned with the XY plane.
On the left, in white, several planar objects.
On the right a non-planar Draft Wire used as the Path Object of a Draft PathArray.

Drafting

  • Line: creates a straight line.
  • Polyline: creates a polyline, a sequence of several connected line segments.
  • Fillet: creates a fillet, a rounded corner, or a chamfer, a straight edge, between two Draft Lines.
  • Arc tools
  • Arc: creates a circular arc from a center, a radius, a start angle and an aperture angle.
  • Arc by 3 points: creates a circular arc from three points that define its circumference.
  • Circle: creates a circle from a center and a radius.
  • Ellipse: creates an ellipse from two points defining a rectangle in which the ellipse will fit.
  • Rectangle: creates a rectangle from two points.
  • Polygon: creates a regular polygon from a center and a radius.
  • B-spline: creates a B-spline curve from several points.
  • Bézier tools
  • Point: creates a simple point.
  • Facebinder: creates a surface object from selected faces.
  • ShapeString: creates a compound shape that represents a text string.

Annotation

  • Text: creates a multi-line text at a given point.
  • Dimension: creates a linear dimension, a radial dimension or an angular dimension.
  • Label: creates a multi-line text with a 2-segment leader line and an arrow.
  • Annotation styles...: allows you to define styles that affect the visual properties of annotation-like objects.

Modification

  • Move: moves or copies selected objects from one point to another.
  • Rotate: rotates or copies selected objects around a center point by a given angle.
  • Scale: scales or copies selected objects around a base point.
  • Mirror: creates mirrored copies from selected objects.
  • Offset: offsets each segment of a selected object over a given distance, or creates an offset copy of the selected object.
  • Trimex: trims or extends a selected object.
  • Stretch: stretches objects by moving selected points.
  • Clone: creates linked copies, clones, of selected objects.
  • Array tools
  • Array: creates an orthogonal array from a selected object. It can optionally create a Link array.
  • Polar array: creates an array from a selected object by placing copies along a circumference. It can optionally create a Link array.
  • Circular array: creates an array from a selected object by placing copies along concentric circumferences. It can optionally create a Link array.
  • Path array: creates an array from a selected object by placing copies along a path.
  • Point Array: creates an array from a selected object by placing copies at the points from a point compound.
  • Edit: puts selected objects in Draft Edit mode. In this mode the properties of objects can be edited graphically.
  • Subelement highlight: temporarily highlights selected objects, or the base objects of selected objects.
  • Upgrade: upgrades selected objects.

Draft Tray

The Draft Tray allows selecting the working plane, defining style settings, toggling construction mode, and specifying the active layer or group.

  • Select Plane: selects the current Draft working plane. Also available in the menu: Draft → Utilities → Select Plane.
  • Set style: sets the default style for new objects. Also available in the menu: Draft → Utilities → Set style.
  • Toggle construction mode: switches Draft construction mode on or off. Also available in the menu: Draft → Utilities → Toggle construction mode.

Draft annotation scale widget

With the Draft annotation scale widget the Draft annotation scale can be specified.

Draft snap widget

The Draft snap widget can be used as an alternative for the Draft Snap toolbar.

Draft Snap toolbar

The Draft Snap toolbar allows selecting the active snap options. The buttons belonging to active options stay depressed. For general information about snapping see: Draft Snap.

  • Snap Lock: enables or disables snapping globally.
  • Snap Angle: snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.
  • Snap Extension: snaps to an imaginary line that extends beyond the endpoints of straight edges.
  • Snap Parallel: snaps to an imaginary line parallel to straight edges.
  • Snap Special: snaps to special points defined by the object.
  • Snap Near: snaps to the nearest point on faces or edges.
  • Snap Ortho: snaps to imaginary lines that cross the previous point at 0°, 45°, 90° and 135°.
  • Snap Grid: snaps to the intersections of grid lines.

Yararlı ek araçlar

Additional tools

Seçilen nesneye bağlı olarak ek araçlar, Taslak → Araçlar yoluyla veya sağ tıklama menüsünden ulaşılabilir.

  • Heal: heals problematic Draft objects found in very old files.

Ek özellikler

  • Koordinatlar: Yeni bir nokta tanımlamak için 3B görünüme tıklamak yerine koordinatları girer.
  • Constraining: imleci bir önceki noktaya göre yatay veya dikey hareketlerle sınırlandırır.
  • Yakalama: Mevcut nesnelerdeki veya ızgaradaki özel yerlere yeni noktalar yerleştirir.

Tree view context menu

The following additional options are available in the Tree view context menu:

Default options

If there is an active document the context menu contains one additional sub-menu:

  • Utilities: a subset of the tools available in the main Draft Utilities menu.

Wire options

For a Draft Wire, Draft BSpline, Draft CubicBezCurve and Draft BezCurve this additional option is available:

  • Flatten this wire: flattens the wire based on its internal geometry. This option currently does not work properly.

Layer container options

For a Draft LayerContainer these additional options are available:

Layer options

For a Draft Layer these additional options are available:

Working plane proxy options

For a Draft WorkingPlaneProxy these additional options are available:

  • Write objects state: updates the GörünümVisibility Map property of the working plane proxy with the current visibility state of objects in the document.

3D view context menu

The following additional options are available in the 3D view context menu:

Default options

If there is an active document the context menu contains one additional sub-menu:

  • Utilities: a subset of the tools available in the main Draft Utilities menu.

Obsolete tools

These commands are obsolete but still available:

Seçenekler

Dosya formatları

Taslak modül, FreeCAD'e aşağıdaki dosya formatları için içe aktarıcı ve dışa aktarıcı sağlar:

Unit tests

See also: Test Workbench.

To run the unit tests of the workbench execute the following from the operating system terminal: 

freecad -t TestDraft

Betik

Taslak modulu Taslak API kullanarak, Python konsolunda ve makrolar da kullanabilirsiniz.

The workbench includes a module to create samples of all objects in a new document.

Use this to test that all objects are produced correctly: 

import drafttests.draft_test_objects as dto
doc = dto.create_test_file()

Inspecting the code of this module can help to understand the programming interface.

Tutorials

Kılavuzlar


Draft
User documentation
Draft
User documentation
Retrieved from "http://wiki.freecad.org/index.php?title=Draft_Workbench/tr&oldid=1165247"