Draft Workbench/sv: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
 
(27 intermediate revisions by 2 users not shown)
Line 2: Line 2:


{{Docnav
{{Docnav
|[[Arch_Workbench|Arch Workbench]]
|[[CAM_Workbench|CAM Workbench]]
|[[Drawing_Workbench|Drawing Workbench]]
|[[FEM_Workbench|FEM Workbench]]
|IconL=Workbench_Arch.svg
|IconL=Workbench_CAM.svg
|IconR=Workbench_Drawing.svg
|IconR=Workbench_FEM.svg
}}
}}


Line 33: Line 33:
* [[Image:Draft_Line.svg|32px]] [[Draft_Line|Line]]: creates a straight line.
* [[Image:Draft_Line.svg|32px]] [[Draft_Line|Line]]: creates a straight line.


* [[Image:Draft_Wire.svg|32px]] [[Draft_Wire|Polyline]]: creates a polyline, a sequence of several connected line segments.
* [[Image:Draft_Wire.svg|32px]] [[Draft_Wire|Polyline]]: creates a polyline (also called wire), a sequence of several connected line segments.


* [[Image:Draft_Fillet.svg|32px]] [[Draft_Fillet|Fillet]]: creates a fillet, a rounded corner, or a chamfer, a straight edge, between two [[Draft_Line|Draft Lines]]. {{Version|0.19}}
* [[Image:Draft_Fillet.svg|32px]] [[Draft_Fillet|Fillet]]: creates a fillet, a rounded corner, or a chamfer, a straight edge, between two [[Draft_Line|Draft Lines]].


* <span id="Draft_ArcTools">[[Image:Draft_Arc.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Arc tools:</span><!--Do not edit span id: the Draft_ArcTools pages redirect here-->
* [[Image:Draft_Arc.svg|32px]] Arc tools


:* [[Image:Draft_Arc.svg|32px]] [[Draft_Arc|Arc]]: creates a circular arc from a center, a radius, a start angle and an aperture angle.
:* [[Image:Draft_Arc.svg|32px]] [[Draft_Arc|Arc]]: creates a circular arc from a center, a radius, a start angle and an aperture angle.


:* [[Image:Draft_Arc_3Points.svg|32px]] [[Draft_Arc_3Points|Arc by 3 points]]: creates a circular arc from three points that define its circumference. {{Version|0.19}}
:* [[Image:Draft_Arc_3Points.svg|32px]] [[Draft_Arc_3Points|Arc by 3 points]]: creates a circular arc from three points that define its circumference.


* [[Image:Draft_Circle.svg|32px]] [[Draft_Circle|Circle]]: creates a circle from a center and a radius.
* [[Image:Draft_Circle.svg|32px]] [[Draft_Circle|Circle]]: creates a circle from a center and a radius.
Line 53: Line 53:
* [[Image:Draft_BSpline.svg|32px]] [[Draft_BSpline|B-spline]]: creates a B-spline curve from several points.
* [[Image:Draft_BSpline.svg|32px]] [[Draft_BSpline|B-spline]]: creates a B-spline curve from several points.


* [[Image:Draft_CubicBezCurve.svg|32px]] Bézier tools
* <span id="Draft_BezierTools">[[Image:Draft_CubicBezCurve.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Bézier tools:</span><!--Do not edit span id: the Draft_BezierTools pages redirect here-->


:* [[Image:Draft_CubicBezCurve.svg|32px]] [[Draft_CubicBezCurve|Cubic Bézier curve]]: creates a Bézier curve of the third degree. {{Version|0.19}}
:* [[Image:Draft_CubicBezCurve.svg|32px]] [[Draft_CubicBezCurve|Cubic Bézier curve]]: creates a Bézier curve of the third degree.


:* [[Image:Draft_BezCurve.svg|32px]] [[Draft_BezCurve|Bézier curve]]: creates a Bézier curve from several points.
:* [[Image:Draft_BezCurve.svg|32px]] [[Draft_BezCurve|Bézier curve]]: creates a Bézier curve from several points.
Line 75: Line 75:
* [[Image:Draft_Label.svg|32px]] [[Draft_Label|Label]]: creates a multi-line text with a 2-segment leader line and an arrow.
* [[Image:Draft_Label.svg|32px]] [[Draft_Label|Label]]: creates a multi-line text with a 2-segment leader line and an arrow.


* [[Image:Draft_AnnotationStyleEditor.svg|32px]] [[Draft_AnnotationStyleEditor|Annotation styles...]]: allows you to define styles that affect the visual properties of annotation-like objects. {{Version|0.19}}
* [[Image:Draft_AnnotationStyleEditor.svg|32px]] [[Draft_AnnotationStyleEditor|Annotation styles...]]: allows you to define styles that affect the visual properties of annotation-like objects.


== Modification ==
== Modification ==
Line 95: Line 95:
* [[Image:Draft_Clone.svg|32px]] [[Draft_Clone|Clone]]: creates linked copies, clones, of selected objects.
* [[Image:Draft_Clone.svg|32px]] [[Draft_Clone|Clone]]: creates linked copies, clones, of selected objects.


* [[Image:Draft_OrthoArray.svg|32px]] Array tools
* <span id="Draft_ArrayTools">[[Image:Draft_OrthoArray.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Array tools:</span><!--Do not edit span id: the Draft_ArrayTools pages redirect here-->


:* [[Image:Draft_OrthoArray.svg|32px]] [[Draft_OrthoArray|Array]]: creates an orthogonal array from a selected object. It can optionally create a [[App_Link|Link]] array. {{Version|0.19}}
:* [[Image:Draft_OrthoArray.svg|32px]] [[Draft_OrthoArray|Array]]: creates an orthogonal array from a selected object. It can optionally create a [[App_Link|Link]] array.


:* [[File:Draft_PolarArray.svg|32px]] [[Draft_PolarArray|Polar array]]: creates an array from a selected object by placing copies along a circumference. It can optionally create a [[App_Link|Link]] array. {{Version|0.19}}
:* [[File:Draft_PolarArray.svg|32px]] [[Draft_PolarArray|Polar array]]: creates an array from a selected object by placing copies along a circumference. It can optionally create a [[App_Link|Link]] array.


:* [[File:Draft_CircularArray.svg|32px]] [[Draft_CircularArray|Circular array]]: creates an array from a selected object by placing copies along concentric circumferences. It can optionally create a [[App_Link|Link]] array. {{Version|0.19}}
:* [[File:Draft_CircularArray.svg|32px]] [[Draft_CircularArray|Circular array]]: creates an array from a selected object by placing copies along concentric circumferences. It can optionally create a [[App_Link|Link]] array.


:* [[Image:Draft_PathArray.svg|32px]] [[Draft_PathArray|Path array]]: creates an array from a selected object by placing copies along a path.
:* [[Image:Draft_PathArray.svg|32px]] [[Draft_PathArray|Path array]]: creates an array from a selected object by placing copies along a path.


:* [[Image:Draft_PathLinkArray.svg|32px]] [[Draft_PathLinkArray|Path Link array]]: idem, but create a [[App_Link|Link]] array instead of a regular array. {{Version|0.19}}
:* [[Image:Draft_PathLinkArray.svg|32px]] [[Draft_PathLinkArray|Path link array]]: idem, but create a [[App_Link|Link]] array instead of a regular array.


:* [[Image:Draft_PointArray.svg|32px]] [[Draft_PointArray|Point Array]]: creates an array from a selected object by placing copies at the points from a point compound.
:* [[Image:Draft_PointArray.svg|32px]] [[Draft_PointArray|Point array]]: creates an array from a selected object by placing copies at the points from a point compound.


:* [[File:Draft_PointLinkArray.svg|32px]] [[Draft_PointLinkArray|Point Link array]]: idem, but create a [[App_Link|Link]] array instead of a regular array. {{Version|0.19}}
:* [[File:Draft_PointLinkArray.svg|32px]] [[Draft_PointLinkArray|Point link array]]: idem, but create a [[App_Link|Link]] array instead of a regular array.


* [[Image:Draft_Edit.svg|32px]] [[Draft_Edit|Edit]]: puts selected objects in Draft Edit mode. In this mode the properties of objects can be edited graphically.
* [[Image:Draft_Edit.svg|32px]] [[Draft_Edit|Edit]]: puts selected objects in Draft Edit mode. In this mode the properties of objects can be edited graphically.
Line 125: Line 125:
* [[Image:Draft_WireToBSpline.svg|32px]] [[Draft_WireToBSpline|Wire to B-spline]]: converts [[Draft_Wire|Draft Wires]] to [[Draft_BSpline|Draft BSplines]] and vice versa.
* [[Image:Draft_WireToBSpline.svg|32px]] [[Draft_WireToBSpline|Wire to B-spline]]: converts [[Draft_Wire|Draft Wires]] to [[Draft_BSpline|Draft BSplines]] and vice versa.


* [[Image:Draft_Draft2Sketch.svg|32px]] [[Draft_Draft2Sketch|Draft to Sketch]]: converts [[Draft Workbench|Draft]] objects to [[Sketcher_NewSketch|Sketcher Sketches]] and vice versa.
* [[Image:Draft_Draft2Sketch.svg|32px]] [[Draft_Draft2Sketch|Draft to sketch]]: converts Draft objects to [[Sketcher_NewSketch|Sketcher Sketches]] and vice versa.


* [[Image:Draft_Slope.svg|32px]] [[Draft Slope|Set slope]]: slopes selected [[Draft_Line|Draft Lines]] or [[Draft_Wire|Draft Wires]] by increasing, or decreasing, the Z coordinate of all points after the first one.
* [[Image:Draft_Slope.svg|32px]] [[Draft Slope|Set slope]]: slopes selected [[Draft_Line|Draft Lines]] or [[Draft_Wire|Draft Wires]] by increasing, or decreasing, the Z coordinate of all points after the first one.
Line 139: Line 139:
[[Image:Draft_tray_default.png]]
[[Image:Draft_tray_default.png]]


* [[Image:Draft_tray_button_plane.png]] [[Draft_SelectPlane|Select Plane]]: selects the current Draft working plane. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_SelectPlane.svg|16px]] Select Plane}}.
* [[Image:Draft_tray_button_plane.png]] [[Draft_SelectPlane|Select plane]]: defines the current Draft working plane. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_SelectPlane.svg|16px]] Select Plane}}.


* [[Image:Draft_tray_button_style.png]] [[Draft_SetStyle|Set style]]: sets the default style for new objects. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_SetStyle.svg|16px]] Set style}}. {{Version|0.19}}
* [[Image:Draft_tray_button_style.png]] [[Draft_SetStyle|Set style]]: sets the default style for new objects. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_SetStyle.svg|16px]] Set style}}.


* [[Image:Draft_tray_button_construction.png]] [[Draft_ToggleConstructionMode|Toggle construction mode]]: switches Draft construction mode on or off. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_ToggleConstructionMode.svg|16px]] Toggle construction mode}}.
* [[Image:Draft_tray_button_construction.png]] [[Draft_ToggleConstructionMode|Toggle construction mode]]: switches Draft construction mode on or off. Also available in the menu: {{MenuCommand|Draft → Utilities → [[Image:Draft_ToggleConstructionMode.svg|16px]] Toggle construction mode}}.
Line 149: Line 149:
== Draft annotation scale widget ==
== Draft annotation scale widget ==


With the [[Draft_annotation_scale_widget|Draft annotation scale widget]] the Draft annotation scale can be specified. {{Version|0.19}}
With the [[Draft_annotation_scale_widget|Draft annotation scale widget]] the Draft annotation scale can be specified.


[[Image:Draft_annotation_scale_widget_button.png]]
[[Image:Draft_annotation_scale_widget_button.png]]
Line 155: Line 155:
== Draft snap widget ==
== Draft snap widget ==


The [[Draft_snap_widget|Draft snap widget]] can be used as an alternative for the [[#Draft_Snap_toolbar|Draft Snap toolbar]]. {{Version|0.19}}
The [[Draft_snap_widget|Draft snap widget]] can be used as an alternative for the [[#Draft_snap_toolbar|Draft snap toolbar]].


[[Image:Draft_snap_widget_button.png]]
[[Image:Draft_snap_widget_button.png]]


== Draft Snap toolbar ==
== Draft snap toolbar ==


The Draft Snap toolbar allows selecting the active snap options. The buttons belonging to active options stay depressed. For general information about snapping see: [[Draft_Snap|Draft Snap]].
The Draft snap toolbar allows selecting the active snap options. The buttons belonging to active options stay depressed. For general information about snapping see: [[Draft_Snap|Draft Snap]].


* [[Image:Draft_Snap_Lock.svg|32px]] [[Draft_Snap_Lock|Snap Lock]]: enables or disables snapping globally.
* [[Image:Draft_Snap_Lock.svg|32px]] [[Draft_Snap_Lock|Snap lock]]: enables or disables snapping globally.


* [[Image:Draft_Snap_Endpoint.svg|32px]] [[Draft_Snap_Endpoint|Snap Endpoint]]: snaps to the endpoints of edges.
* [[Image:Draft_Snap_Endpoint.svg|32px]] [[Draft_Snap_Endpoint|Snap endpoint]]: snaps to the endpoints of edges.


* [[Image:Draft_Snap_Midpoint.svg|32px]] [[Draft_Snap_Midpoint|Snap Midpoint]]: snaps to the midpoint of straight and circular edges.
* [[Image:Draft_Snap_Midpoint.svg|32px]] [[Draft_Snap_Midpoint|Snap midpoint]]: snaps to the midpoint of edges.


* [[Image:Draft_Snap_Center.svg|32px]] [[Draft_Snap_Center|Snap Center]]: snaps to the center point of faces and circular edges, and to the {{PropertyData|Placement}} point of [[Draft_WorkingPlaneProxy|Draft WorkingPlaneProxies]] and [[Arch_BuildingPart|Arch BuildingParts]].
* [[Image:Draft_Snap_Center.svg|32px]] [[Draft_Snap_Center|Snap center]]: snaps to the center point of faces and circular edges, and to the {{PropertyData|Placement}} point of [[Draft_WorkingPlaneProxy|Draft WorkingPlaneProxies]] and [[Arch_BuildingPart|Arch BuildingParts]].


* [[Image:Draft_Snap_Angle.svg|32px]] [[Draft_Snap_Angle|Snap Angle]]: snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.
* [[Image:Draft_Snap_Angle.svg|32px]] [[Draft_Snap_Angle|Snap angle]]: snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.


* [[Image:Draft_Snap_Intersection.svg|32px]] [[Draft_Snap_Intersection|Snap Intersection]]: snaps to the intersection of two edges.
* [[Image:Draft_Snap_Intersection.svg|32px]] [[Draft_Snap_Intersection|Snap intersection]]: snaps to the intersection of two edges.


* [[Image:Draft_Snap_Perpendicular.svg|32px]] [[Draft_Snap_Perpendicular|Snap Perpendicular]]: snaps to the perpendicular point on edges.
* [[Image:Draft_Snap_Perpendicular.svg|32px]] [[Draft_Snap_Perpendicular|Snap perpendicular]]: snaps to the perpendicular points on faces ({{Version|0.21}}) and edges.


* [[Image:Draft_Snap_Extension.svg|32px]] [[Draft_Snap_Extension|Snap Extension]]: snaps to an imaginary line that extends beyond the endpoints of straight edges.
* [[Image:Draft_Snap_Extension.svg|32px]] [[Draft_Snap_Extension|Snap extension]]: snaps to an imaginary line that extends beyond the endpoints of straight edges.


* [[Image:Draft_Snap_Parallel.svg|32px]] [[Draft_Snap_Parallel|Snap Parallel]]: snaps to an imaginary line parallel to straight edges.
* [[Image:Draft_Snap_Parallel.svg|32px]] [[Draft_Snap_Parallel|Snap parallel]]: snaps to an imaginary line parallel to straight edges.


* [[Image:Draft_Snap_Special.svg|32px]] [[Draft_Snap_Special|Snap Special]]: snaps to special points defined by the object.
* [[Image:Draft_Snap_Special.svg|32px]] [[Draft_Snap_Special|Snap special]]: snaps to special points defined by the object.


* [[Image:Draft_Snap_Near.svg|32px]] [[Draft_Snap_Near|Snap Near]]: snaps to the nearest point on faces or edges.
* [[Image:Draft_Snap_Near.svg|32px]] [[Draft_Snap_Near|Snap near]]: snaps to the nearest point on faces and edges.


* [[Image:Draft_Snap_Ortho.svg|32px]] [[Draft_Snap_Ortho|Snap Ortho]]: snaps to imaginary lines that cross the previous point at 0°, 45°, 90° and 135°.
* [[Image:Draft_Snap_Ortho.svg|32px]] [[Draft_Snap_Ortho|Snap ortho]]: snaps to imaginary lines that cross the previous point at multiples of 45°.


* [[Image:Draft_Snap_Grid.svg|32px]] [[Draft_Snap_Grid|Snap Grid]]: snaps to the intersections of grid lines.
* [[Image:Draft_Snap_Grid.svg|32px]] [[Draft_Snap_Grid|Snap grid]]: snaps to the intersections of grid lines.


* [[Image:Draft_Snap_WorkingPlane.svg|32px]] [[Draft_Snap_WorkingPlane|Snap WorkingPlane]]: projects the snap point onto the current [[Draft_SelectPlane|working plane]].
* [[Image:Draft_Snap_WorkingPlane.svg|32px]] [[Draft_Snap_WorkingPlane|Snap working plane]]: projects snap points onto the current [[Draft_SelectPlane|working plane]].


* [[Image:Draft_Snap_Dimensions.svg|32px]] [[Draft_Snap_Dimensions|Snap Dimensions]]: shows temporary X and Y dimensions.
* [[Image:Draft_Snap_Dimensions.svg|32px]] [[Draft_Snap_Dimensions|Snap dimensions]]: shows temporary X and Y dimensions.


* [[Image:Draft_ToggleGrid.svg|32px]] [[Draft_ToggleGrid|Toggle Grid]]: switches the grid on or off.
* [[Image:Draft_ToggleGrid.svg|32px]] [[Draft_ToggleGrid|Toggle grid]]: changes the visibility of the grid.


== Draft utility tools toolbar ==
== Draft utility tools toolbar ==


* [[Image:Draft_Layer.svg|32px]] [[Draft_Layer|Layer]]: creates a [[Draft_Layer|Draft Layer]]. {{Version|0.19}}
* [[Image:Draft_LayerManager.svg|32px]] [[Draft_LayerManager|Manage layers...]]: allows to manage the layers in a document. {{Version|0.21}}


* [[Image:Draft_AddNamedGroup.svg|32px]] [[Draft_AddNamedGroup|Add a new named group]]: creates a named [[Std_Group|Std Group]] and moves selected objects to that group. {{Version|0.20}}
* [[Image:Draft_AddNamedGroup.svg|32px]] [[Draft_AddNamedGroup|Add a new named group]]: creates a named [[Std_Group|Std Group]] and moves selected objects to that group. {{Version|0.20}}
Line 203: Line 203:
* [[Image:Draft_AddToGroup.svg|32px]] [[Draft_AddToGroup|Move to group...]]: moves objects to a [[Std_Group|Std Group]]. It can also ungroup objects.
* [[Image:Draft_AddToGroup.svg|32px]] [[Draft_AddToGroup|Move to group...]]: moves objects to a [[Std_Group|Std Group]]. It can also ungroup objects.


* [[Image:Draft_SelectGroup.svg|32px]] [[Draft_SelectGroup|Select group]]: selects the content of [[Draft_Layer|Draft Layers]], [[Std_Group|Std Groups]] or group-like [[Arch_Workbench|Arch]] objects.
* [[Image:Draft_SelectGroup.svg|32px]] [[Draft_SelectGroup|Select group]]: selects the contents of [[Std_Group|Std Groups]] or group-like [[Arch_Workbench|Arch]] objects.


* [[Image:Draft_AddConstruction.svg|32px]] [[Draft_AddConstruction|Add to Construction group]]: moves objects to the [[Draft_ToggleConstructionMode|Draft construction group]].
* [[Image:Draft_AddConstruction.svg|32px]] [[Draft_AddConstruction|Add to construction group]]: moves objects to the [[Draft_ToggleConstructionMode|Draft construction group]].


* [[Image:Draft_ToggleDisplayMode.svg|32px]] [[Draft_ToggleDisplayMode|Toggle normal/wireframe display]]: switches the {{PropertyView|Display Mode}} property of selected objects between {{Value|Flat Lines}} and {{Value|Wireframe}}.
* [[Image:Draft_ToggleDisplayMode.svg|32px]] [[Draft_ToggleDisplayMode|Toggle normal/wireframe display]]: switches the {{PropertyView|Display Mode}} property of selected objects between {{Value|Flat Lines}} and {{Value|Wireframe}}.
Line 217: Line 217:
* [[Image:Draft_ApplyStyle.svg|32px]] [[Draft_ApplyStyle|Apply current style]]: applies the current style settings to selected objects.
* [[Image:Draft_ApplyStyle.svg|32px]] [[Draft_ApplyStyle|Apply current style]]: applies the current style settings to selected objects.


* [[Image:Draft_Heal.svg|32px]] [[Draft_Heal|Heal]]: heals problematic Draft objects found in very old files.
* [[Image:Draft_Layer.svg|32px]] [[Draft_Layer|Layer]]: creates a [[Draft_Layer|Draft Layer]]. Available in the [[Draft_Workbench#Draft_utility_tools_toolbar|Draft utility tools toolbar]] in {{VersionMinus|0.20}}.


* [[Image:Draft_ToggleContinueMode.svg|32px]] [[Draft_ToggleContinueMode|Toggle continue mode]]: switches continue mode on or off.
* [[Image:Draft_Heal.svg|32px]] [[Draft_Heal|Heal]]: heals problematic Draft objects found in very old files.


* [[Image:Draft_ShowSnapBar.svg|32px]] [[Draft_ShowSnapBar|Show snap toolbar]]: shows the [[#Draft_Snap_toolbar|Draft Snap toolbar]].
* [[Image:Draft_ShowSnapBar.svg|32px]] [[Draft_ShowSnapBar|Show snap toolbar]]: shows the [[#Draft_snap_toolbar|Draft snap toolbar]].


<span id="Additional_features"></span>
===Gemensamt beteende===
===Gemensamt beteende===


Line 242: Line 243:
=== Default options ===
=== Default options ===


For most Draft objects the following option is available:
⚫
If there is an active document the context menu contains one additional sub-menu:
⚫
* {{MenuCommand|Utilities}}: a subset of the tools available in the main Draft Utilities menu.


* Edit: edits the object. Depending on the object type either [[Draft_Edit|Draft Edit]] or a dedicated edit solution is used. {{Version|0.21}}
⚫
=== Wire options ===


⚫
If there is an active document the context menu contains an additional sub-menu:
For a [[Draft_Wire|Draft Wire]], [[Draft_BSpline|Draft BSpline]], [[Draft_CubicBezCurve|Draft CubicBezCurve]] and [[Draft_BezCurve|Draft BezCurve]] this additional option is available:


⚫
* Utilities: a subset of the tools available in the main Draft Utilities menu.
⚫
* [[Image:Draft_Edit.svg|32px]] Flatten this wire: flattens the wire based on its internal geometry. This option currently does not work properly.


=== Layer container options ===
=== Layer container options ===
Line 255: Line 255:
For a [[Draft_Layer|Draft LayerContainer]] these additional options are available:
For a [[Draft_Layer|Draft LayerContainer]] these additional options are available:


* [[Image:Draft_Layer.svg|32px]] [[Draft_Layer#Layer_container_options|Merge layer duplicates]]: merges all layers with the same base label. This does not work in FreeCAD version 0.19.
* [[Image:Draft_Layer.svg|32px]] [[Draft_Layer#Layer_container_options|Merge layer duplicates]]: merges all layers with the same base label.


* [[Image:Draft_NewLayer.svg|32px]] [[Draft_Layer#Layer_container_options|Add new layer]]: adds a new layer to the current document.
* [[Image:Draft_NewLayer.svg|32px]] [[Draft_Layer#Layer_container_options|Add new layer]]: adds a new layer to the current document.
Line 266: Line 266:


* [[Image:Draft_SelectGroup.svg|32px]] [[Draft_SelectGroup|Select layer contents]]: selects the objects inside the selected layer.
* [[Image:Draft_SelectGroup.svg|32px]] [[Draft_SelectGroup|Select layer contents]]: selects the objects inside the selected layer.

=== Text options ===

For a [[Draft_Text|Draft Text]] and a [[Draft_Label|Draft Label]] that contains one or more hyperlinks, to a local or remote file or an URL, this additional option is available:

* Open hyperlinks: the hyperlinks are opened in the appropriate application (as defined by the OS). There is a warning in the case of multiple hyperlinks. {{Version|1.0}}

⚫
=== Wire options ===

For a [[Draft_Line|Draft Line]] and a [[Draft_Wire|Draft Wire]] this additional option is available:

⚫
* [[Image:Draft_Edit.svg|32px]] Flatten: flattens the wire on the current [[Draft_SelectPlane|Draft working plane]]. This option does not work properly in {{VersionMinus|0.19}}.


=== Working plane proxy options ===
=== Working plane proxy options ===
Line 282: Line 294:


If there is an active document the context menu contains one additional sub-menu:
If there is an active document the context menu contains one additional sub-menu:

* {{MenuCommand|Utilities}}: a subset of the tools available in the main Draft Utilities menu.
* Utilities: a subset of the tools available in the main Draft Utilities menu.

=== Text options ===

See [[#Text_options|above]].


== Obsolete tools ==
== Obsolete tools ==


* [[Image:Draft_Array.svg|32px]] [[Draft_Array|Array]]: creates an orthogonal array from a selected object. The created array can be turned into a [[Draft_PolarArray|polar array]] or a [[Draft_CircularArray|circular array]] by changing its {{PropertyData|Array Type}} property. Not available in {{VersionPlus|0.21}}.
These commands are obsolete but still available:


* [[Image:Draft_Array.svg|32px]] [[Draft_Array|Array]]: creates an orthogonal array from a selected object. The created array can be turned into a [[Draft_PolarArray|polar array]] or a [[Draft_CircularArray|circular array]] by changing its {{PropertyData|Array Type}} property. {{Obsolete|0.19}}
* [[Image:Draft_Drawing.svg|32px]] [[Draft_Drawing|Drawing]]: inserts views of selected objects into a [[Drawing_Workbench|drawing]] page. Not available in {{VersionPlus|0.21}}.


* [[Image:Draft_Drawing.svg|32px]] [[Draft_Drawing|Drawing]]: inserts views of selected objects into a [[Drawing_Workbench|drawing]] page. {{Obsolete|0.17}}
* [[Image:Draft_ToggleContinueMode.svg|32px]] [[Draft_ToggleContinueMode|Toggle continue mode]]: switches continue mode on or off. Not available in {{VersionPlus|1.0}}.


== Preferences ==
== Preferences ==
Line 298: Line 315:
* [[Image:Preferences-import-export.svg|32px]] [[Import_Export_Preferences|Import Export Preferences]]: preferences available for importing from and exporting to different file formats.
* [[Image:Preferences-import-export.svg|32px]] [[Import_Export_Preferences|Import Export Preferences]]: preferences available for importing from and exporting to different file formats.


<span id="File_formats"></span>
===Import & export===
===Import & export===


Line 326: Line 344:
}}
}}


<span id="Scripting"></span>
===API===
===API===


Line 332: Line 351:
</div>
</div>


The workbench includes a module to create samples of all objects in a new document. {{Version|0.19}}
The workbench includes a module to create samples of all objects in a new document.


Use this to test that all objects are produced correctly:
Use this to test that all objects are produced correctly:
Line 348: Line 367:
===Tutorials===
===Tutorials===
* [[Draft_tutorial/sv|Draft tutorial]]
* [[Draft_tutorial/sv|Draft tutorial]]
* [[Draft_tutorial_Outdated/sv|Draft tutorial Outdated]]
* [[Draft_ShapeString_tutorial|Draft ShapeString tutorial]]
</div>
</div>




<div class="mw-translate-fuzzy">
{{docnav/sv|Raytracing_Workbench/sv|Robot_Workbench/sv}}
{{docnav/sv|Raytracing_Workbench/sv|Robot_Workbench/sv}}
</div>


{{Draft Tools navi{{#translation:}}}}
{{Draft Tools navi{{#translation:}}}}

Latest revision as of 09:20, 21 April 2024

Other languages:
Draft workbench icon

Introduction

Rit modulen är ett pågående arbete och är en ganska experimentell modul som har gjorts för att lägga till grundläggande 2d ritfunktionalitet till FreeCAD. Den är helt och hållet skriven i python, och är även tänkt att fungera som en presentation om hur mycket du kan utöka FreeCAD endast med hjälp av python, utan att ens röra källkoden.

Draft objects can be used for general drafting, similar to what can be done with Inkscape or AutoCAD. But they can also form the base for the creation of 3D objects in other workbenches. A Draft Wire may define the path of an Arch Wall, a Draft Polygon can be extruded with Part Extrude, etc. Many of the Draft modifier tools can be applied to 2D and 3D objects created with other workbenches as well. You can, for example, move a Sketch or create a Draft OrthoArray from a Part object.

The Draft Workbench also provides tools to define a working plane, a grid, and a snapping system to precisely control the position of geometry.

If your primary goal is the production of complex 2D drawings and DXF files, and you don't need 3D modelling, FreeCAD may not be the right choice for you. You may wish to consider a dedicated software program for technical drafting instead, such as LibreCAD or QCad.

The image shows the grid aligned with the XY plane.
On the left, in white, several planar objects.
On the right a non-planar Draft Wire used as the Path Object of a Draft PathArray.

Drafting

  • Line: creates a straight line.
  • Polyline: creates a polyline (also called wire), a sequence of several connected line segments.
  • Fillet: creates a fillet, a rounded corner, or a chamfer, a straight edge, between two Draft Lines.
  • Arc tools:
  • Arc: creates a circular arc from a center, a radius, a start angle and an aperture angle.
  • Arc by 3 points: creates a circular arc from three points that define its circumference.
  • Circle: creates a circle from a center and a radius.
  • Ellipse: creates an ellipse from two points defining a rectangle in which the ellipse will fit.
  • Rectangle: creates a rectangle from two points.
  • Polygon: creates a regular polygon from a center and a radius.
  • B-spline: creates a B-spline curve from several points.
  • Bézier tools:
  • Point: creates a simple point.
  • Facebinder: creates a surface object from selected faces.
  • ShapeString: creates a compound shape that represents a text string.

Annotation

  • Text: creates a multi-line text at a given point.
  • Dimension: creates a linear dimension, a radial dimension or an angular dimension.
  • Label: creates a multi-line text with a 2-segment leader line and an arrow.
  • Annotation styles...: allows you to define styles that affect the visual properties of annotation-like objects.

Modification

  • Move: moves or copies selected objects from one point to another.
  • Rotate: rotates or copies selected objects around a center point by a given angle.
  • Scale: scales or copies selected objects around a base point.
  • Mirror: creates mirrored copies from selected objects.
  • Offset: offsets each segment of a selected object over a given distance, or creates an offset copy of the selected object.
  • Trimex: trims or extends a selected object.
  • Stretch: stretches objects by moving selected points.
  • Clone: creates linked copies, clones, of selected objects.
  • Array tools:
  • Array: creates an orthogonal array from a selected object. It can optionally create a Link array.
  • Polar array: creates an array from a selected object by placing copies along a circumference. It can optionally create a Link array.
  • Circular array: creates an array from a selected object by placing copies along concentric circumferences. It can optionally create a Link array.
  • Path array: creates an array from a selected object by placing copies along a path.
  • Point array: creates an array from a selected object by placing copies at the points from a point compound.
  • Edit: puts selected objects in Draft Edit mode. In this mode the properties of objects can be edited graphically.
  • Subelement highlight: temporarily highlights selected objects, or the base objects of selected objects.
  • Upgrade: upgrades selected objects.

Draft Tray

The Draft Tray allows selecting the working plane, defining style settings, toggling construction mode, and specifying the active layer or group.

  • Select plane: defines the current Draft working plane. Also available in the menu: Draft → Utilities → Select Plane.
  • Set style: sets the default style for new objects. Also available in the menu: Draft → Utilities → Set style.
  • Toggle construction mode: switches Draft construction mode on or off. Also available in the menu: Draft → Utilities → Toggle construction mode.

Draft annotation scale widget

With the Draft annotation scale widget the Draft annotation scale can be specified.

Draft snap widget

The Draft snap widget can be used as an alternative for the Draft snap toolbar.

Draft snap toolbar

The Draft snap toolbar allows selecting the active snap options. The buttons belonging to active options stay depressed. For general information about snapping see: Draft Snap.

  • Snap lock: enables or disables snapping globally.
  • Snap angle: snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.
  • Snap extension: snaps to an imaginary line that extends beyond the endpoints of straight edges.
  • Snap parallel: snaps to an imaginary line parallel to straight edges.
  • Snap special: snaps to special points defined by the object.
  • Snap near: snaps to the nearest point on faces and edges.
  • Snap ortho: snaps to imaginary lines that cross the previous point at multiples of 45°.
  • Snap grid: snaps to the intersections of grid lines.

Draft utility tools toolbar

Additional tools

The Draft → Utilities menu contains several tools. Most of them can also be accessed from toolbars or the Draft Tray and have already been mentioned above. For the following tools this is not the case:

  • Heal: heals problematic Draft objects found in very old files.

Gemensamt beteende

  • Snäpp: tillåter dig att placera nya punkter på speciella platser på existerande objekt
  • Begränsning: Tillåter att nya punkter placeras horisontellt eller vertikalt i relation till tidigare punkter
  • Konstruktionsläge: Tillåter dig att skilja viss geometri åt från resten, för att lätt kunna stänga på/av
  • Arbetsplan: Alla skisskommandon kan användas på valfritt plani i 3D rymden. Det gällande arbetsplanet kan konfigureras på ett lätt sätt

Tree view context menu

The following additional options are available in the Tree view context menu:

Default options

For most Draft objects the following option is available:

If there is an active document the context menu contains an additional sub-menu:

  • Utilities: a subset of the tools available in the main Draft Utilities menu.

Layer container options

For a Draft LayerContainer these additional options are available:

Layer options

For a Draft Layer these additional options are available:

Text options

For a Draft Text and a Draft Label that contains one or more hyperlinks, to a local or remote file or an URL, this additional option is available:

  • Open hyperlinks: the hyperlinks are opened in the appropriate application (as defined by the OS). There is a warning in the case of multiple hyperlinks. introduced in version 1.0

Wire options

For a Draft Line and a Draft Wire this additional option is available:

  • Flatten: flattens the wire on the current Draft working plane. This option does not work properly in version 0.19 and below.

Working plane proxy options

For a Draft WorkingPlaneProxy these additional options are available:

  • Write objects state: updates the VyVisibility Map property of the working plane proxy with the current visibility state of objects in the document.

3D view context menu

The following additional options are available in the 3D view context menu:

Default options

If there is an active document the context menu contains one additional sub-menu:

  • Utilities: a subset of the tools available in the main Draft Utilities menu.

Text options

See above.

Obsolete tools

  • Array: creates an orthogonal array from a selected object. The created array can be turned into a polar array or a circular array by changing its DataArray Type property. Not available in version 0.21 and above.
  • Drawing: inserts views of selected objects into a drawing page. Not available in version 0.21 and above.

Preferences

  • Preferences: general preferences for the Draft Workbench.

Import & export

Detta är funktioner för att öppna, importera eller exportera andra filformat. Öppna kommet att öppna ett nytt dokument med filens innehåll, medan importera kommer att lägga till filinnehållet till det nuvarande dokumentet. Exportera kommer att spara de valda objekten till en fil. Om inget är valt, så kommer alla objekt att exporteras. Var uppmärksam på att eftersom tanken med Ritmodulen är att arbeta med 2d objekt, så fokuserar dessa importerare endast på 2d objekt, och, fastän DXF och OCA formaten stödjer objektdefinitioner i 3D rymden (objekt är inte nödvändigtvis platta), så kommer de inte att importera volymetriska objekt som nät, 3D ytor, etc, utan snarare linjer, cirklar, text eller flata former. För närvarande så stöds följande filformat:

  • Autodesk .DXF: Importerar och exporterar DXF filer som har skapats med andra CAD applikationer
  • SVG (som geometri): Importerar och exporterar SVG filer som har skapats med vektorbaserade ritapplikationer

Unit tests

See also: Test Workbench.

To run the unit tests of the workbench execute the following from the operating system terminal: 

freecad -t TestDraft

API

Se Skiss API sidan för en komplett beskrivning av Skissfunktionerna som du kan använda i skript och makron

The workbench includes a module to create samples of all objects in a new document.

Use this to test that all objects are produced correctly: 

import drafttests.draft_test_objects as dto
doc = dto.create_test_file()

Inspecting the code of this module can help to understand the programming interface.

Tutorials

Tutorials


Raytracing_Workbench/sv
Robot_Workbench/sv
Draft
User documentation
Retrieved from "http://wiki.freecad.org/index.php?title=Draft_Workbench/sv&oldid=1401904"