Draft WireToBSpline/de: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 17: Line 17:


[[Image:Draft Wire2BSpline example.jpg|400px]]
[[Image:Draft Wire2BSpline example.jpg|400px]]
{{Caption|Convertir a wire to a B-Spline, and a closed B-Spline to a closed wire}}
{{Caption|Convert a wire to a B-Spline, and a closed B-Spline to a closed wire}}


==Usage==
==Usage==
Line 26: Line 26:
A new object will be created; the original object will not be modified.
A new object will be created; the original object will not be modified.


{{Emphasis|Note:}} if a closed wire with sharp edges is used to create a spline, the new object may have self intersecting curve segments, and may not be visible in the 3D view. If this is the case, manually set {{PropertyData|Make Face}} to {{FALSE}} to see the new shape, or set {{PropertyData|Closed}} to {{FALSE}} to create an open shape.
{{Emphasis|Note:}} if a closed wire with sharp edges is used to create a spline, the new object may have self intersecting curve segments, and may not be visible in the [[3D view]]. If this is the case, manually set {{PropertyData|Make Face}} to {{FALSE}} to see the new shape, or set {{PropertyData|Closed}} to {{FALSE}} to create an open shape.


==Options==
==Options==
Line 71: Line 71:
}}
}}


⚫
{{Draft Tools navi}}

⚫
{{Userdocnavi}}
{{clear}}
{{clear}}
⚫
{{Draft Tools navi{{#translation:}}}}
⚫
{{Userdocnavi{{#translation:}}}}

Revision as of 02:05, 21 February 2020

Other languages:

Draft WireToBSpline

Menüeintrag
Drafting → Wire to BSpline
Arbeitsbereich
Draft, Arch
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Description

The Draft WireToBSpline tool converts Draft Wires to Draft BSplines, and vice-versa.

Convert a wire to a B-Spline, and a closed B-Spline to a closed wire

Usage

  1. Select a Draft Wire or a Draft BSpline. The tool is disabled if no object is selected.
  2. Press the Draft WireToBSpline button.

A new object will be created; the original object will not be modified.

Note: if a closed wire with sharp edges is used to create a spline, the new object may have self intersecting curve segments, and may not be visible in the 3D view. If this is the case, manually set DatenMake Face to false to see the new shape, or set DatenClosed to false to create an open shape.

Options

There are no options for this tool. Either it works with the selected object or not.

Scripting

See also: Draft API and FreeCAD Scripting Basics.

There is no programming interface available for the WireToBSpline tool; however, creating a new object from the points of another is simple.

The Points attribute of an object is a list with the points that comprise that object; this list can be passed to functions that build geometry. Each point is defined by its FreeCAD.Vector, with units in millimeters.

Example: 

import FreeCAD, Draft

# Make a spline from the points of a wire
p1 = FreeCAD.Vector(1000, 1000, 0)
p2 = FreeCAD.Vector(2000, 1000, 0)
p3 = FreeCAD.Vector(2500, -1000, 0)
p4 = FreeCAD.Vector(3500, -500, 0)

base_wire = Draft.makeWire([p1, p2, p3, p4])

points1 = base_wire.Points
spline = Draft.makeBSpline(points1)

# Make a wire from the points of a spline
base_spline = Draft.makeBSpline([-p1, -1.3*p2, -1.2*p3, -2.1*p4])

points2 = base_spline.Points
Wire = Draft.makeWire(points2)
Draft
Anwenderdokumentation
Retrieved from "http://wiki.freecad.org/index.php?title=Draft_WireToBSpline/de&oldid=621956"