Draft Wire/ru: Difference between revisions

Revision as of 20:15, 9 October 2021

Other languages:

Line

Fillet

Draft

Системное название
Draft Wire
Draft Wire
Расположение в меню
Черчение → DWire
Верстаки
Draft, Arch
Быстрые клавиши
W I
Представлено в версии
-
См. также
Линия, B-сплайн

Description

Описание

Инструмент «ломаная» создает полилинию (последовательность строк из нескольких сегментов) в текущей work plane. Он берет linewidth and color , предварительно установленный на вкладке «Задачи». Инструмент Wire ведет себя как инструмент Draft Line, за исключением того, что он не останавливается после двух точек.

The corners of a Draft Wire can be filleted (rounded) or chamfered by changing its ДанныеFillet Radius or ДанныеChamfer Size respectively. It is also possible to subdivide the edges of a Draft Wire by changing its ДанныеSubdivisions property.

Create

Usage

See also: Draft Tray, Draft Snap and Draft Constrain.

Использование

Нажмите кнопку Draft Wire или нажмите W, затем клавиши I
Щелкните первую точку на трехмерном изображении или введите coord
Нажмите дополнительную точку на трехмерном представлении или введите coordinate
Нажмите F или C или дважды щелкните последнюю точку или щелкните по первой точке, чтобы закончить или закрыть провод. Если провод закрыт, он также будет лицом, даже если он отображается в виде каркаса.

Options

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts.

To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, coordinates are relative to the last point, if available, else they are relative to the coordinate system origin.
Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
Press L or click the Filled checkbox to toggle filled mode. If filled mode is on, the created wire will have ДанныеMake Face set to true and will have a filled face, provided it is closed and does not self-intersect. Note that a self-intersecting wire with a face will not display properly, for such a wire ДанныеMake Face must be set to false.
Press T or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after using Finish or Close, or after creating a closed wire by snapping to the first point of the wire, allowing you to continue creating wires.
Press the Undo button to undo the last point. The Ctrl+Z keyboard shortcut currently does not work as expected.
Press A or the Finish button to finish the command and leave the wire open.
Press O or the Close button to finish the command and close the wire. A closed wire can also be created by snapping to the first point of the wire.
Press W or the Wipe button to delete the segments already placed, but keep working from the last point.
Press U or the Set WP button to adjust the current working plane in the orientation of the last segment.
Press S to switch Draft snapping on or off.
Press Esc or the Close button to finish the command.

Join

Usage

The end points of the Draft Lines and/or Draft Wires to be joined must be exactly coincident. If required first adjust points to ensure that this is the case.
Select two or more Draft Lines and/or Draft Wires.
There are several ways to invoke the command:
- Press the Draft Wire button.
- Select the Drafting → Polyline option from the menu.
- Use the keyboard shortcut: P then L.

Notes

A Draft Wire can be edited with the Draft Edit command.
A Draft Wire can be converted to a Draft BSpline with the Draft WireToBSpline command.
Draft Lines and Draft Wires can also be joined with the Draft Join command or the Draft Upgrade command.

Preferences

See also: Preferences Editor and Draft Preferences.

To change the number of decimals used for the input of coordinates: Edit → Preferences... → General → Units → Units settings → Number of decimals.
To change the initial value of filled mode: Edit → Preferences... → Draft → General settings → Draft tools options → Fill objects with faces whenever possible. Changing the filled mode in a task panel will override this preference for the current FreeCAD session.

Properties

Data

Draft

ДанныеArea (Area): (read-only) specifies the area of the face of the wire. The value will be 0.0 if ДанныеMake Face if false or the face cannot be created.
ДанныеBase (Link)
ДанныеChamfer Size (Length): specifies the length of the chamfers at the corners of the wire.
ДанныеClosed (Bool): specifies if the wire is closed or not. If the wire is initially open this value is false, setting it to true will draw a line segment to close the wire. If the wire is initially closed this value is true, setting it to false will remove the last line segment and make the wire open.
ДанныеEnd (VectorDistance): specifies the end point of the wire.
ДанныеFillet Radius (Length): specifies the radius of the fillets at the corners of the wire.
ДанныеLength (Length): (read-only) specifies the total length of the wire.
ДанныеMake Face (Bool): specifies if the wire makes a face or not. If it is true a face is created, otherwise only the edges are considered part of the object. This property only works if ДанныеClosed is true and if the wire does not self-intersect.
ДанныеPoints (VectorList): specifies the points of the wire in its local coordinate system.
ДанныеStart (VectorDistance): specifies the start point of the wire.
ДанныеSubdivisions (Integer): specifies the number of subdivisions for each edge of the wire. If it is 1 each edge will be divided into 2 equal segments. Subdivisions are applied before chamfers and fillets.
ДанныеTool (Link)

View

Draft

ВидArrow Size (Length): specifies the size of the symbol displayed at the end of the wire.
ВидArrow Type (Enumeration): specifies the type of symbol displayed at the end of the wire, which can be Dot, Circle, Arrow, Tick or Tick-2.
ВидEnd Arrow (Bool): specifies whether to show a symbol at the end of the wire, so it can be used as an annotation line.
ВидPattern (Enumeration): specifies the Draft Pattern with which to fill the face of the closed wire. This property only works if ДанныеMake Face is true and if ВидDisplay Mode is Flat Lines.
ВидPattern Size (Float): specifies the size of the Draft Pattern.

Scripting

To create a Draft Wire use the make_wire method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeWire method.

wire = make_wire(pointslist, closed=False, placement=None, face=None, support=None)
wire = make_wire(Part.Wire, closed=False, placement=None, face=None, support=None)

Creates a Wire object with the given list of points, pointslist.
- Each point in the list is defined by its FreeCAD.Vector, with units in millimeters.
- Alternatively, the input can be a Part.Wire, from which points are extracted.
If closed is True, or if the first and last points are identical, the wire is closed.
If placement is None the shape is created at the origin.
If face is True, and the wire is closed, the wire will make a face, that is, it will appear filled.

Example:

import FreeCAD as App
import Draft

doc = App.newDocument()

p1 = App.Vector(0, 0, 0)
p2 = App.Vector(1000, 1000, 0)
p3 = App.Vector(2000, 0, 0)

wire1 = Draft.make_wire([p1, p2, p3], closed=True)
wire2 = Draft.make_wire([p1, 2*p3, 1.3*p2], closed=True)
wire3 = Draft.make_wire([1.3*p3, p1, -1.7*p2], closed=True)

doc.recompute()