Rysunek Roboczy: Przytnij

From FreeCAD Documentation
Revision as of 15:03, 12 June 2021 by Kaktus (talk | contribs) (Created page with "Narzędzie Przytnij przycina lub wydłuża Linia i Polilinia tak, że ich koniec znajduje się na przecięciu z inną linią lub krawędzią.")
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Rysunek Roboczy: Przytnij

Lokalizacja w menu
Modyfkacja → Przytnij
Środowisko pracy
Rysunek Roboczy, Architektura
Domyślny skrót
T R
Wprowadzono w wersji
-
Zobacz także
Part: Wyciągnij

Opis

Narzędzie Przytnij przycina lub wydłuża Linia i Polilinia tak, że ich koniec znajduje się na przecięciu z inną linią lub krawędzią.

The Trimex tool also extrudes faces created from closed wires. In this respect, it's similar to Part Extrude and to PartDesign Pad.

Wire segment extended, then wire segment trimmed; face extruded into a solid body

Użycie

  1. Select a line that you wish to trim or extend, or select a face that you wish to extrude.
  2. Press the Draft Trimex button, or press T then R keys.
  3. Click a point in the 3D view, or enter a distance and press Enter.

Trimming or extending is decided from the position of the pointer.

  • If the line is short it can be extended to approach and cross another line.
  • If the line is long and crosses another line, the excess length can be trimmed.
  • If the pointer is moved over another object or edge, the trim-extend operation will snap to that object, so that the trimmed or extended line ends exactly at the intersection with the object. This snapping works even without Draft Snap modes active.

A Draft Wire allows you to trim or extend any of its individual segments, which may affect the entire shape of the wire. In this case, the Trimex tool will work on the line segment that is closer to the pointer. Hold the Shift key to keep trimming or extending the current segment independently of the position of the pointer.

When the selected object is a face, the Trimex tool switches to extrude mode. In extrude mode the extrusion is done in the direction of the normal of the face. For example, if a rectangle lies on the XY plane, it should be extruded in the Z direction. To do this correctly, pressing the Z key may be necessary to constrain the distance to the Z direction. Alternatively, hold the Shift key to extrude in any direction that is not the normal.

Opcje

  • Wciśnij klawisze X, Y lub Z, aby zablokować punkt na danej osi.
  • Przytrzymaj klawisz Shift, aby ograniczyć operację do bieżącego odcinka i nie wybierać innego.
    • W przypadku trybu wyciągnięcia, przytrzymaj klawisz Shift, aby wyciąć ścianę w kierunku, który nie jest kierunkiem normalnym.
  • Przytrzymaj klawisz Alt podczas przycinania, by odwrócić kierunek operacji, to znaczy, że drugi koniec odcinka zostanie ucięty.

Tworzenie skryptów

Zobacz również: Dokumentacja API generowana automatycznie oraz

Podstawy pisania skryptów dla FreeCAD.

Dla narzędzia Przytnij nie ma dostępnego interfejsu programistycznego. Zobacz narzędzie Część: Wyciągnij do wyciągania powierzchni i innych kształtów.