Draft ToggleContinueMode

From FreeCAD Documentation
Revision as of 21:37, 21 February 2020 by Renatorivo (talk | contribs) (Marked this version for translation)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎română • ‎svenska • ‎čeština • ‎русский

Draft ToggleContinueMode.svg Draft ToggleContinueMode

Menu location
Draft → Utilities → Toggle continue mode
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Wire, Draft BSpline


Description

Many geometry creation tools from the Workbench Draft.svg Draft and Workbench Arch.svg Arch workbenches allow you to activate the continue checkbox. If continue mode is on, the drawing tool will restart after you finish with it, allowing you to draw another object with the same tool, without pressing the tool button again.

This allows you to create several objects in a row until you deactivate the continue checkbox or exit the tool.

Usage

  1. Invoke a command such as Draft Line.svg Draft Line or Arch Wall.svg Arch Wall.
  2. Press the Draft ToggleContinueMode.svg Toggle continue mode checkbox.
  3. Use the tool normally, placing various lines or walls, one after the other.
  4. Press Esc or the Close button to abort the current command; objects already placed will remain.