Draft Snap WorkingPlane

From FreeCAD Documentation
Revision as of 22:00, 24 August 2018 by Renatorivo (talk | contribs)

Draft WorkingPlane

Menu location
Draft → Snap → WorkingPlane
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
None


Description

Snap mode that always places the snapped point on the current working plane, even if you snap to a point outside that working plane.


Use

  1. Select wanted working plane.
  2. Select WorkingPlane from snapping tools.


Notes