Draft Snap Perpendicular

From FreeCAD Documentation
Revision as of 18:32, 24 August 2021 by Roy 043 (talk | contribs) (Module to Workbench renaming.)

Draft Snap Perpendicular

Menu location
None
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock

Description

The Draft Snap Perpendicular option snaps to the perpendicular point on edges. The edges can belong to Draft or Arch objects but also to objects created with other workbenches.

This snap option will also find points on the extension of straight edges. Circular edges are always treated as full circles, if a circular edge is an arc the point that is found may not lie on the actual edge.

Snapping the second point of a line to the perpendicular point on an extended edge

Usage

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.
  2. If Draft Snap Perpendicular is not active do one of the following:
    • Press the button in the Draft Snap toolbar.
    • Press the button in the Draft snap widget and in the menu select the Snap Perpendicular option.
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Pick a first point. This snap option requires a previous point. The perpendicular point will be determined in relation to this point.
  6. Move the cursor over an edge.
  7. The edge is highlighted.
  8. If a perpendicular is found the point is marked and the icon is displayed near the cursor.
  9. Click to confirm the point.

Preferences

See Draft Snap.