Draft Snap Perpendicular: Difference between revisions

From FreeCAD Documentation
(→‎How to use: {{Draft Tools navi}} and {{Userdocnavi}})
(→‎How to use: to which your point will be attached)
Line 19: Line 19:
# Choose [[Draft Line]] to draw a shape. Enter the first point.
# Choose [[Draft Line]] to draw a shape. Enter the first point.
# Move the cursor over a line segment or edge of another object to select the point of perpendicularity.
# Move the cursor over a line segment or edge of another object to select the point of perpendicularity.
# The edge will be highlighted in yellow, and a small white circle will indicate the point on the edge, or on its extension, where your point will be attached.
# The edge will be highlighted in yellow, and a small white circle will indicate the point on the edge, or on its extension, to which your point will be attached.
# Click to attach your new point.
# Click to attach your new point.



Revision as of 17:28, 23 November 2018

Draft Perpendicular

Menu location
Draft → Snap → Perpendicular
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft ToggleSnap

Description

This method snaps to a line or edge, or to an extension of it, to produce a line that is perpendicular to that edge.

Snapping the second point of a line to another line so that the first one is perpendicular to the second one

How to use

  1. Make sure File:Snap Lock.svg Draft ToggleSnap and File:Snap Perpendicular.svg Snap Perpendicular are turned on.
  2. Choose Draft Line to draw a shape. Enter the first point.
  3. Move the cursor over a line segment or edge of another object to select the point of perpendicularity.
  4. The edge will be highlighted in yellow, and a small white circle will indicate the point on the edge, or on its extension, to which your point will be attached.
  5. Click to attach your new point.