Draft Aimantation Orthogonal

From FreeCAD Documentation
Revision as of 09:52, 29 January 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Draft Ortho

Emplacement du menu
Draft → Snap → Ortho
Ateliers
Draft, Arch
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Description

This method snaps to a point on an imaginary line that originates from the previous point, and extends infinitely at specific increments of 45°; this includes 0°, 90°, 135°, 180°, 225°, 270°, and other integer multiples.

File:Draft Snap Ortho.png

Snapping the second point of a line to a point that makes an angle of 135° with the horizontal; small circles indicate all possible snapping directions

How to use

  1. Make sure File:Snap Lock.svg Draft ToggleSnap and File:Snap Ortho.svg Snap Ortho are turned on.
  2. Choose a Draft tool to draw a shape.
  3. Move the cursor approximately in the direction of a line that makes an angle of 45° with the horizontal.
  4. The snap symbol will appear when the tentative line makes an angle of 45°, or a multiple of it.
  5. Click to attach your new point.