Draft Snap Midpoint/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
No edit summary
Line 5: Line 5:


===Descrizione===
===Descrizione===
Questa modalità di aggancio consente di selezionare i punti medi degli elementi.





Revision as of 21:30, 24 March 2016

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Punto centrale

Posizione nel menu
Draft → Snap → Punto centrale
Ambiente
Draft, Arch
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno


Descrizione

Questa modalità di aggancio consente di selezionare i punti medi degli elementi.


Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near the midpoint of the element you wish to attach your element to
  4. below on the right side of the cursor the symbol of the snap mode will appear
  5. click to attach your element to the selected endpoint of target element


Notes

Snap mode can be used with

  • sketcher elements (lines, arcs)
  • draft elements (DWires, Lines, Arcs)
  • edges of shapes
  • edges of solids

Clicking on the snap-mode icon will toggle the snap mode on/off.