Draft Snap Midpoint/de: Difference between revisions
No edit summary |
(Created page with "===Beschreibung=== Dieser Objektfang-Modus lässt Dich den Mittelpunkt von Elementen wählen.") |
||
Line 4: | Line 4: | ||
=== |
===Beschreibung=== |
||
Dieser Objektfang-Modus lässt Dich den Mittelpunkt von Elementen wählen. |
|||
This snap mode lets you select the midpoint of elements. |
|||
Revision as of 11:32, 4 January 2019
Draft Mittelpunkt |
Menüeintrag |
---|
Entwurf → Objektfang → Mittelpunkt |
Arbeitsbereich |
Draft, Arch |
Standardtastenkürzel |
None |
Eingeführt in Version |
- |
Siehe auch |
Snap |
Beschreibung
Dieser Objektfang-Modus lässt Dich den Mittelpunkt von Elementen wählen.
Use
- Make sure snap mode is turned on
- Choose element to be inserted into the FreeCAD-document
- Move cursor near the midpoint of the element you wish to attach your element to
- below on the right side of the cursor the symbol of the snap mode will appear
- click to attach your element to the selected endpoint of target element
Notes
Snap mode can be used with
- sketcher elements (lines, arcs)
- draft elements (DWires, Lines, Arcs)
- edges of shapes
- edges of solids
Clicking on the snap-mode icon will toggle the snap mode on/off.