Draft Snap Midpoint

From FreeCAD Documentation
Revision as of 18:27, 31 July 2021 by Roy 043 (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Draft Snap Midpoint

Menu location
None
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock

Description

The Draft Snap Midpoint option snaps to the midpoint of straight and circular edges. The edges can belong to Draft or Arch objects but also to objects created with other workbenches.

Snapping the second point of a line to the midpoint of an edge of a rectangle

Usage

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.
  2. If Draft Snap Midpoint is not active do one of the following:
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the pointer over a straight or circular edge.
  6. The edge is highlighted.
  7. If a midpoint is found the point is marked and the icon is displayed near the pointer.
  8. Click to confirm the point.

Preferences

See Draft Snap.