Draft Snap Midpoint: Difference between revisions

From FreeCAD Documentation
(Fixed SeeAlso in GuiCommand)
(Second level headings, not third level)
Line 10: Line 10:
}}
}}


== Description == <!--T:3-->

===Description=== <!--T:3-->
This snap mode lets you select the midpoint of elements.
This snap mode lets you select the midpoint of elements.


== How to use == <!--T:4-->

===Use=== <!--T:4-->
#Make sure snap mode is turned on
#Make sure snap mode is turned on
#Choose element to be inserted into the FreeCAD-document
#Choose element to be inserted into the FreeCAD-document
Line 22: Line 20:
#click to attach your element to the selected endpoint of target element
#click to attach your element to the selected endpoint of target element


=== Notes === <!--T:5-->

===Notes=== <!--T:5-->
Snap mode can be used with
Snap mode can be used with
*sketcher elements (lines, arcs)
*sketcher elements (lines, arcs)
Line 30: Line 27:
*edges of solids
*edges of solids
Clicking on the snap-mode icon will toggle the snap mode on/off.
Clicking on the snap-mode icon will toggle the snap mode on/off.



</translate>
</translate>

Revision as of 21:08, 22 November 2018

Draft Midpoint

Menu location
Draft → Snap → Midpoint
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft ToggleGrid

Description

This snap mode lets you select the midpoint of elements.

How to use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near the midpoint of the element you wish to attach your element to
  4. below on the right side of the cursor the symbol of the snap mode will appear
  5. click to attach your element to the selected endpoint of target element

Notes

Snap mode can be used with

  • sketcher elements (lines, arcs)
  • draft elements (DWires, Lines, Arcs)
  • edges of shapes
  • edges of solids

Clicking on the snap-mode icon will toggle the snap mode on/off.