Draft Snap Grid/it: Difference between revisions

From FreeCAD Documentation
(Created page with "# Assicurarsi che {{Button|16px Mostra griglia}} sia attivo. # Assicurarsi che {{Button|16px Draft T...")
(Created page with "== Impostazione della griglia ==")
Line 24: Line 24:
# Cliccare per agganciare il nuovo punto.
# Cliccare per agganciare il nuovo punto.


== Setting the grid ==
== Impostazione della griglia ==


Before using the grid, make sure your units are set correctly in the menu {{MenuCommand|Edit → Preferences → General → Units}}. For example, "MKS (m/kg/s/degree)" is good for dealing with distances typical in modelling buildings; "Standard (mm/kg/s/degree)" is good if you need to model details in smaller parts; setting 4 decimals is good to consider small fractions of a meter or millimeter.
Before using the grid, make sure your units are set correctly in the menu {{MenuCommand|Edit → Preferences → General → Units}}. For example, "MKS (m/kg/s/degree)" is good for dealing with distances typical in modelling buildings; "Standard (mm/kg/s/degree)" is good if you need to model details in smaller parts; setting 4 decimals is good to consider small fractions of a meter or millimeter.

Revision as of 20:09, 16 December 2018

File:Snap Grid.svg Griglia

Posizione nel menu
Draft → Aggancia → Griglia
Ambiente
Draft, Arch
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Mostra/nascondi griglia, Aggancio

Descrizione

Questo metodo esegue lo snap all'intersezione di due linee della griglia, se la griglia è visibile.

File:Draft Snap Grid.png

Snap del secondo punto di una linea alla griglia visibile

Utilizzo

  1. Assicurarsi che Mostra griglia sia attivo.
  2. Assicurarsi che File:Snap Lock.svg Attiva aggancio e File:Snap Grid.svg Aggancia la griglia siano attivi.
  3. Scegliere uno strumento di Draft per disegnare una forma.
  4. Spostare il cursore vicino all'intersezione di due linee della griglia finché non viene visualizzato il simbolo di snap.
  5. Cliccare per agganciare il nuovo punto.

Impostazione della griglia

Before using the grid, make sure your units are set correctly in the menu Edit → Preferences → General → Units. For example, "MKS (m/kg/s/degree)" is good for dealing with distances typical in modelling buildings; "Standard (mm/kg/s/degree)" is good if you need to model details in smaller parts; setting 4 decimals is good to consider small fractions of a meter or millimeter.

Make sure you use Draft ToggleGrid to show a grid with enough resolution for your modelling needs. You can change the grid properties in the menu Edit → Preferences → Draft → Grid and snapping → Grid. For example, lines at every 50 mm, with major lines every 20 lines, and 1000 lines in total (the grid covers 50 meters) is good for modelling buildings; use lines at every 1 mm and 1000 lines in total (the grid covers 1 meter) if you are modelling small parts.