Draft: Endpoint

From FreeCAD Documentation
Revision as of 08:35, 28 August 2021 by Heda (talk | contribs)

Draft Endpoint

Menu location
Draft → Snap → Endpoint
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
None

Description

Descriere

Acest mod snap vă permite să selectați punctele finale ale elementelor.

Snapping the second point of a line to the endpoint of an edge

Utilizare

  1. Asigurați-vă că modul de ancorare este activat
  2. Selectați elementul care trebuie inserat în documentul FreeCAD
  3. Mutați cursorul în apropierea unuia dintre punctele cardinale la care doriți să ancorați/atașați elementul dvs.
  4. Mai jos, în partea dreaptă a cursorului, va apărea simbolul modului snap
  5. Clic pentru a atașa elementul dvs. la elementul final selectat al elementului țintă

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.
  2. If Draft Snap Endpoint is not active do one of the following:
    • Press the button in the Draft Snap toolbar.
    • Press the button in the Draft snap widget and in the menu select the Snap Endpoint option.
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the cursor over an edge.
  6. The edge is highlighted.
  7. If an endpoint is found the point is marked and the icon is displayed near the cursor.
  8. Optionally move the cursor closer to the other endpoint to select that point instead.
  9. Click to confirm the point.

Preferences

See Draft Snap.