Draft Snap Endpoint

From FreeCAD Documentation
Revision as of 18:29, 24 August 2021 by Roy 043 (talk | contribs) (Module to Workbench renaming.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский • ‎中文(中国大陆)‎
Arrow-left.svg Previous: Draft Snap Lock.svg Snap Lock

Draft Snap Endpoint.svg Draft Snap Endpoint

Menu location
None
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock

Description

The Draft Snap Endpoint.svg Draft Snap Endpoint option snaps to the endpoints of edges. The edges can belong to Draft or Arch objects but also to objects created with other workbenches.

Draft Snap Endpoint example.png

Snapping the second point of a line to the endpoint of an edge

Usage

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.svg Draft Snap Lock.
  2. If Draft Snap Endpoint is not active do one of the following:
    • Press the Draft Snap Endpoint.svg button in the Draft Snap toolbar.
    • Press the Draft Snap Lock.svgToolbar flyout arrow.svg button in the Draft snap widget and in the menu select the Draft Snap Endpoint.svg Snap Endpoint option.
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the cursor over an edge.
  6. The edge is highlighted.
  7. If an endpoint is found the point is marked and the Draft Snap Endpoint.svg icon is displayed near the cursor.
  8. Optionally move the cursor closer to the other endpoint to select that point instead.
  9. Click to confirm the point.

Preferences

See Draft Snap.


Arrow-left.svg Previous: Draft Snap Lock.svg Snap Lock