Draft Snap Endpoint

From FreeCAD Documentation
Revision as of 14:11, 29 July 2021 by Roy 043 (talk | contribs) (Revising...)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Draft Snap Endpoint

Menu location
None
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock

Description

The Draft Snap Endpoint command toggles the Snap Endpoint option which snaps to the endpoints of segments.

Snapping the second point of a line to the endpoint of an edge of a rectangle

Usage

For general information about snapping and the related preferences see: Draft Snap.

  1. Make sure snapping is enabled. See: Draft Snap Lock.
  2. If Snap Endpoint is not switched on do one of the following:
  3. Choose a Draft or Arch command to create your geometry.
  4. Move the pointer over a segment.
  5. The segment is highlighted.
  6. If an endpoint is found the point is marked and the icon is displayed near the pointer.
  7. Optionally move the pointer closer to the other endpoint to select that point instead.
  8. Click to confirm the point.