Draft Snap Dimensions: Difference between revisions
Renatorivo (talk | contribs) mNo edit summary |
Renatorivo (talk | contribs) mNo edit summary |
||
| Line 11: | Line 11: | ||
#Make sure snap mode is turned on |
#Make sure snap mode is turned on |
||
#Choose element (for example draft line) to be inserted into the FreeCAD-document |
#Choose element (for example draft line) to be inserted into the FreeCAD-document |
||
#Move cursor near draft |
#Move cursor near draft dimension of the element you wish to attach your element to |
||
#below on the right side of the cursor the symbol of the snap mode will appear |
#below on the right side of the cursor the symbol of the snap mode will appear |
||
#click to attach your element to the selected line of the draft dimension of the target element |
#click to attach your element to the selected line of the draft dimension of the target element |
||
Revision as of 19:55, 21 March 2016
|
Draft Dimensions |
| Menu location |
|---|
| Draft → Snap → Dimensions |
| Workbenches |
| Draft, Arch |
| Default shortcut |
| None |
| Introduced in version |
| - |
| See also |
| None |
Description
Lets you snap to one of the three lines making up the draft dimension
Use
- Make sure snap mode is turned on
- Choose element (for example draft line) to be inserted into the FreeCAD-document
- Move cursor near draft dimension of the element you wish to attach your element to
- below on the right side of the cursor the symbol of the snap mode will appear
- click to attach your element to the selected line of the draft dimension of the target element
Notes