Draft Snap Center

From FreeCAD Documentation
Revision as of 10:57, 2 August 2021 by Roy 043 (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Draft Snap Center

Menu location
None
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock

Description

The Draft Snap Center option snaps to the center point of faces and circular edges, and to the DataPlacement point of Draft WorkingPlaneProxies and Arch BuildingParts. The faces and edges can belong to Draft or Arch objects but also to objects created with other workbenches.

Snapping the second point of a line to the center of a circular edge

Snapping the second point of a line to the Placement point of an Arch BuildingPart

Usage

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.
  2. If Draft Snap Center is not active do one of the following:
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Do one of the following:
    • To select the center point of a face or circular edge:
      • Move the cursor over the face or edge.
      • The face or edge is highlighted.
    • To select the DataPlacement point of a Draft WorkingPlaneProxy:
      • Move the cursor over any element of the WP proxy.
      • The WP proxy is not highlighted.
    • To select the DataPlacement point of an Arch BuildingPart:
      • Move the cursor over one of the edges of the small axis symbol of the BuildingPart, or over the text next to it that displays the DataLabel of the BuildingPart and its level.
      • Only the edges of the axis symbol are highlighted. The text is not highlighted.
  6. If a point is found the point is marked and the icon is displayed near the cursor.
  7. Click to confirm the point.

Preferences

See Draft Snap.