Draft Snap Center: Difference between revisions

Revision as of 16:35, 20 March 2016

Snaps to the special cardinal points of circles and arcs, at 45° and 90°.

Make sure snap mode is turned on
Choose element to be inserted into the FreeCAD-document
Move cursor near one the arc/circle/circular edge you wish to attach your element to
Below on the right side of the cursor the symbol of the snap mode will appear
Click to attach your element to the selected endpoint of target element

Will also work with Draft Move and Draft Rotate.

Snap mode can be used with

Clicking on the snap-mode icon will toggle the snap mode on/off.

Other languages:

@@ Line 1: / Line 1: @@
-{{Template:UnfinishedDocu}}
 <translate>
-<!--T:2-->
+<!--T:1-->
 {{GuiCommand|Name=Draft Center|Workbenches=[[Draft Module|Draft]], [[Arch Module|Arch]]|MenuLocation=Draft → [[Draft Snap|Snap]] → Center|Shortcut=|SeeAlso=}}
-===Description=== <!--T:3-->
+===Description=== <!--T:2-->
+Snaps to the special cardinal points of circles and arcs, at 45° and 90°.
+===Use=== <!--T:3-->
+#Make sure snap mode is turned on
+#Choose element to be inserted into the FreeCAD-document
+#Move cursor near one the arc/circle/circular edge you wish to attach your element to
+#Below on the right side of the cursor the symbol of the snap mode will appear
+#Click to attach your element to the selected endpoint of target element
+Will also work with Draft Move and Draft Rotate.
+===Notes=== <!--T:4-->
+Snap mode can be used with
+*sketcher elements (arcs, circles)
+*draft elements (arcs, circles)
+*edge of circular face of shape
+*edge of circular face of solid
+Clicking on the snap-mode icon will toggle the snap mode on/off.
-<!--T:4-->
-[[Category:UnfinishedDocu]]
 </translate>