Draft Snap/sv: Difference between revisions

Revision as of 17:09, 18 February 2014

Snapping means "gluing" your next 3d point onto an existing point. Snapping is available with most Draft and Arch tools, and can be enabled and disabled globally with the Draft ToggleSnap command. Each snap location below can also be enabled or disabled individually by clicking the corresponding button on the snap toolbar.

Available snap locations

File:Snap Angle.png Angle: the special cardinal points of circles and arcs, at 45° and 90°
File:Snap Center.png Center: the center point of arcs and circles
File:Snap Endpoint.png Endpoint: the endpoints of line, arc and spline segments
File:Snap Extension.png Extension: on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap
File:Snap Grid.png Grid: the nodes of the Draft grid, if visible.
File:Snap Intersection.png Intersection: the intersection of 2 line or arc segments. Hover the mouse over the two desired bjects to activate their intersection snaps
File:Snap Midpoint.png Midpoint: the middle point of line and arc segments
File:Snap Near.png Near: the closest point on the nearest object
File:Snap Ortho.png Ortho: on imaginary lines that cross the last point, and extend at 0°, 45° and 90°
File:Snap Parallel.png Parallel: on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap
File:Snap Perpendicular.png Perpendicular: on line and arc segments, perpendicularly to the latest point

Options

File:Snap Lock.png Lock: turns snapping on/off globally
Certain additional snap locations can be obtained by combining 2 snap locations, such as ortho + extension, that will give you a snap point at the intersection of their imaginary lines.
Other, more complex snap locations can also be obtained by using constraining (by pressing SHIFT or X or Y or Z while drawing).
The maximum distance at which a point is snapped a snap location is specified in the preferences, and can also be changed on-the-fly by pressing [ or ] keys.

Other languages:

@@ Line 1: / Line 1: @@
+Snapping means "gluing" your next 3d point onto an existing point. Snapping is available with most [[Draft Module|Draft]] and [[Arch Module|Arch]] tools, and can be enabled and disabled globally with the [[#Options|Draft ToggleSnap]] command. Each snap location below can also be enabled or disabled individually by clicking the corresponding button on the snap toolbar.
-Snäppa innebär att din nästa 3d punkt "klistras" på en existerande punkt.
 [[Image:Draft_Snap_example.jpg]]
+==Available snap locations==
-Snäppning i Skissmodulen har två lägen: ett aktivt läge och ett passivt läge.
+* [[Image:Snap_Angle.png|32px]] '''Angle''': the special cardinal points of circles and arcs, at 45° and 90°
+* [[Image:Snap_Center.png|32px]] '''Center''': the center point of arcs and circles
+* [[Image:Snap_Endpoint.png|32px]] '''Endpoint''': the endpoints of line, arc and spline segments
+* [[Image:Snap_Extension.png|32px]] '''Extension''': on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap
+* [[Image:Snap_Grid.png|32px]] '''Grid''': the nodes of the Draft grid, if visible.
+* [[Image:Snap_Intersection.png|32px]] '''Intersection''': the intersection of 2 line or arc segments. Hover the mouse over the two desired bjects to activate their intersection snaps
+* [[Image:Snap_Midpoint.png|32px]] '''Midpoint''': the middle point of line and arc segments
+* [[Image:Snap_Near.png|32px]] '''Near''': the closest point on the nearest object
+* [[Image:Snap_Ortho.png|32px]] '''Ortho''': on imaginary lines that cross the last point, and extend at 0°, 45° and 90°
+* [[Image:Snap_Parallel.png|32px]] '''Parallel''': on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap
+* [[Image:Snap_Perpendicular.png|32px]] '''Perpendicular''': on line and arc segments, perpendicularly to the latest point
-===Passivt läge===
+==Options==
+* [[Image:Snap_Lock.png|32px]] '''Lock''': turns snapping on/off globally
-Du är automatiskt i passivt läge när du ritar.
+* Certain additional snap locations can be obtained by combining 2 snap locations, such as ortho + extension, that will give you a snap point at the intersection of their imaginary lines.
-Om din musmarkör i passivt läge svävar över ett existerand objekt, så kommer din punkt att snäppas till den närmaste punkten på objektet. En öppen cirkelsymbol syns.
+* Other, more complex snap locations can also be obtained by using [[Draft Constrain|constraining]] (by pressing {{KEY|SHIFT}} or {{KEY|X}} or {{KEY|Y}} or {{KEY|Z}} while drawing).
+* The maximum distance at which a point is snapped a snap location is specified in the [[Draft Preferences|preferences]], and can also be changed on-the-fly by pressing {{KEY|<nowiki>[</nowiki>}} or {{KEY|<nowiki>]</nowiki>}} keys.
+[[Category:User Documentation]]
-===Aktivt läge===
-För att växla till aktivt läge, håll ned {{KEY|CTRL}} medan du ritar.
-I aktivt läge, så visas antingen en stängd cirkel eller en öppen eller stängd kvadrat, beroende på snäpptyp.
-I alla verktyg som stöder snäppning, är följande snäpp platser tillgängliga:
-* Linjernas ändpunkt
-* Linjernas mittpunkt
-* Cirklarnas och cirkelbågarnas centrum
-* Cirklarnas och cirkelbågarnas kvadrantpunkter
-* Cirkelbågarnas ändpunkter
-* Vid begränsning ({{KEY|SKIFT}}), vertikalt eller horisontellt uppriktade punkter på linjer
-* Skärningspunkter mellan segment
-I verktyg som stöder både snäppning och begränsning, så kan kombinationen av båda ({{KEY|SKIFT}}+{{KEY|CTRL}}) utöka snäppningsmöjligheterna.
+{{clear}}
-[[Category:User Documentation/sv]]
+<languages/>
-{{languages/sv | {{de|Draft Snap/de}} {{en|Draft Snap}} {{es|Draft Snap/es}} {{fr|Draft Snap/fr}} {{it|Draft Snap/it}}}}